View Full Version : Barrel steel
Chris Taylor
09-23-2015, 06:01 PM
I'm trying to figure out my DH barrels 62410 .. This
Gun had to of been resorted ! barrels look new and are cut 3 inches,book calls for 30" . Second thing is (titanic steel) or what ever it was on the rib has been smoothed off. Third thing barrels stamped 3.12 for weight but feel like 2.12 . fourth thing barrel lug looks new or redone. And finally chambers are 3" with a beautiful smooth mirror finish .?!.?!
Jim DiSpagno
09-23-2015, 06:08 PM
Pics, pics, and more pics. Thanks
Brian Dudley
09-23-2015, 06:43 PM
Bet you the barrels are sleeved...
Chris Taylor
09-23-2015, 07:04 PM
pichttp://i1027.photobucket.com/albums/y331/mrandmrsctaylor/image.jpg2_zps518z014z.jpg (http://s1027.photobucket.com/user/mrandmrsctaylor/media/image.jpg2_zps518z014z.jpg.html)
Dean Romig
09-23-2015, 07:25 PM
That serial number would indicate Damascus Steel. It is much too early for Titanic Steel.
.
Bill Holcombe
09-23-2015, 07:55 PM
Unless it was sent back for replacement barrels obviously.
Dean Romig
09-23-2015, 08:02 PM
Unless it was sent back for replacement barrels obviously.
The fact that the barrel steel roll stamp has been obliterated suggests the rib said Damascus Steel.
.
greg conomos
09-23-2015, 08:22 PM
I agree, the gun sounds like it has been resorted.
Dean Romig
09-23-2015, 08:42 PM
Refinished??
.
wayne goerres
09-23-2015, 08:46 PM
I think you should have your gun checked by a competent gunsmith before firing.
Chris Taylor
09-23-2015, 09:31 PM
http://http://i1027.photobucket.com/albums/y331/mrandmrsctaylor/image.jpg3_zpshunfmczd.jpg
Rick Losey
09-23-2015, 09:45 PM
I agree, the gun sounds like it has been resorted.
was that in the memory of Yogi?
Chris Taylor
09-25-2015, 09:43 PM
After further review and good light: Damascus steel was smoothed off the rib.the bores were honed or back bored, 30 inch barrels cut to 26 and the barrels were blued.
Dean Romig
09-25-2015, 11:01 PM
After further review and good light: Damascus steel was smoothed off the rib.the bores were honed or back bored, 30 inch barrels cut to 26 and the barrels were blued.
Why am I not surprised...
.
Chris Taylor
09-30-2015, 06:01 PM
[URL=http://s1027.photobucket.com/user/mrandmrsctaylor/media/image.jpg5_zpslnpoy2zc.jpg.html]http://i1027.photobucket.com/albums/y331/mrandmrsctaylor/image.jpg5_zpslnpoy2zc.jpg[/URL
Chris Taylor
09-30-2015, 06:04 PM
[URL=http://s1027.photobucket.com/user/mrandmrsctaylor/media/image.jpg6_zpssxyltogc.jpg.html]http://i1027.photobucket.com/albums/y331/mrandmrsctaylor/image.jpg6_zpssxyltogc.jpg[/UR
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.