Brian does it again....20ga VH 1906

[Jim Pasman]

This 1906 VH 20ga was lettered with a "straight grip" in the order book. When purchased, it had a PG that was definitely a replaced stock with a wrist much thicker than normal (see first photo comparing it to another 0 frame gun) as well as other modifications.

Brian Dudley worked his magic and brought the stock back to life including a correct Silvers pad......here are some "before and after" photos. They don't do justice to Brian's wonderful work but you'll see the results.

Thank you, Brian!

[greg conomos]

Very nice. It seems a lot of restock wind up with a thicker wrist for some reason, which loses the gracefulness of a Parker stock.

[Brian Dudley]

Thanks Jim,

The pistol grip stock was a Remington replacement. It had the "Dogbone" in the head of the stock and was fitted with a Remington grip cap.

The fat stock allowed for plenty of wood to be able to rework it into a straight grip.

[John Havard]

Beautiful work Brian!

[Mike Franzen]

That turned out really nice. How long are the barrels?

[Jim Pasman]

They are 26", double ivory beads, look like "new" and not originally specified (except for length) per the letter, Mike

[Jim Pasman]

Thanks Jim,

The pistol grip stock was a Remington replacement. It had the "Dogbone" in the head of the stock and was fitted with a Remington grip cap.

The fat stock allowed for plenty of wood to be able to rework it into a straight grip.
Brian - I thought it was a Remington replacement but there were no codes stamped on the water table which is why we get the caveat with our letters....

[Dean Romig]

Remington repair codes are "always" stamped on the left barrel flat... not on the water tables.

[Jay Gardner]

Great work, Brian.

[Mark Garrett]

Brain your the man , beautiful job !

[Jay Oliver]

Great work as usual Brian! That is a beautiful gun with it's original straight stock configuration.

[John Powers]

Nice Brian, your passion for perfection shows in your work,

[Jim Pasman]

My mistake, Dean. Here are pictures of the barrel flats both left and right. On the left flat there is a very small but distinct numeral "8" stamped in the upper left in addition to Walter King's proof mark to the right. I'm not familiar with the repair codes so don't know if it's meaningful but ready to learn.

[Dean Romig]

Hi Jim - the 8 is in the location where Remington repair codes would normally appear.

So, that presents a puzzle..... If Remington replaced the stock, why wouldn't they have stamped it with a repair code...? An 8 is not a Remington code that we know of.

I'm not arguing that the stock is made by Remington - it looks like a Remington stock and Brian confirms it... but the puzzle remains.

[Jim Pasman]

Thanks, Dean! She's a cute shooter now so I won't add this mystery to my "meaning of life" list. Appreciate your reply.

[Dean Romig]

Jim, I hope to see it soon. It's a very nice gun.

[Richard Flanders]

Nice! Good job Brian. :bowdown:

[Jim Pasman]

You will - I'll send a PM

[Gary Carmichael Sr]

Nice job Brian! gary

[calvin humburg]

Very nice for sure! ch