New 1874 Parker Just Aquired

[Brian Dudley]

I had the opportunity to purchase this grade 1 straight grip 12g. Lifter No. 3832. Made in 1874. 30" Stub Twist barrels on a small 1 frame. The gun weighs in at a very nice 7-1/4 lbs. The condition of this gun is great. The photos don't really do full justice as to how much case color is remaining on the gun. Original checkering is clean, all screws are great.

The gun is equipt with rebounding locks.
The 1866 patent date is hand engraved on the trigger plate which is a little different for a grade 1. Also, the trigger guard has the serial number engraved on it. Many guns earlier that this one did not have the humber engraved on the guard bow.

The gun has very modern and shootable dimensions of 14-3/8' LOP and 1.5"/2.5" drops. Chambers measure at just over 2-5/8" and have longer forcing cones indicating being chambered for paper shells originally.

The bores in the gun are near perfect.

Mr. Hoover would get a kick out of this. The bores are both even tapered from chamber to muzzle. Right starts (at 4" from breech) at .7305" and Left at .7270". At 28" Right is .7235" and Left is .7200" There really no noricable choke in the barrels. Maybe a quick .002 or .003" in the last couple inches.
The bore diameters gradually decrease the whole length of the barrels by about .005" - .010" every couple of inches.

33617

33618

33619

33620

33621

33622

33623

33624

33625

33626

[Rick Losey]

Very nice gun Brian

[Eldon Goddard]

It is amazing to think checkering that old is still in that nice of shape. It must not of been handled very much.

[David Holes]

Brian, I am curious how them tapered chokes will pattern, Dave

[Mills Morrison]

That is a great find.

[edgarspencer]

In 1874, the concept of chokes hadn't really been fully accepted, and Im sure a lot of Parkers still had straight walled tubes, or taper bored. Interestingly, I just shot an 1870s Lancaster, with no chokes, at Clays last week and kept right up with the high tech guys.

[Frank Cronin]

Very nice Brian. I have her twin built 1000 or so units later also in 1874. Pictures in my album. Interesting on the chokes as mine do have constriction mod / mod on one barrel and the shorter 28" are cyl / cyl.

[Brian Dudley]

It just has 30" long chokes.

[Virginia Hessler]

Nice find Brian, I really like those lifters. Looking forward to getting one myself.

[ed good]

very nice.

rst makes a dandy 7/8 oz load that should be safe?

[Craig Larter]

Brian: Beautiful old Parker thanks for posting the pictures.

[Brian Dudley]

I took this gun out the other day and shot a couple rounds of skeet with. It performed and handled very well!

[greg conomos]

The taper is probably intentional, but I could also believe that it is the byproduct of a machine tool that was out of spec. In 1874 a few thousandths per foot was probably considered pretty good.

[Brian Dudley]

Here is the information from the letter.

33873

[Dave Purnell]

Very nice Brian. I have her twin built 1000 or so units later also in 1874. Pictures in my album. Interesting on the chokes as mine do have constriction mod / mod on one barrel and the shorter 28" are cyl / cyl.

Frank and Brian,
Are you guys going to Hausman's next week? I have 4054 which is a third grade one from 1874, although the hard life version. It would be fun to compare the three in person. It letters as a $75 grade, 30", Stub Twist, 12ga, choked full and full.

[Brian Dudley]

Yes, I will be there and will have this gun with me. I will have a 3 table booth in the main tent.

[Larry Frey]

Guys,
The PGCA will also have a display booth in the main tent at Hausman's and the theme this year will be hammer guns so there will be plenty there to look at and compare. I will have a couple there including 3251 also made in 1874. This year’s D grade top lever hammer gun will also be there for people to see.

[Harry Schlott]

Hi Brian,
I too have a Parker Lifter, which I've had for years. Serial # 3600.

[Frank Cronin]

Smoothbore - I'll be bringing my lifter #4071. It will be at the Parker table. I hope to see your lifter and Brian's too.

[Rick Losey]

Guys,
The PGCA will also have a display booth in the main tent at Hausman's and the theme this year will be hammer guns so there will be plenty there to look at and compare. I will have a couple there including 3251 also made in 1874. This year’s D grade top lever hammer gun will also be there for people to see.

you guys are killing me :crying:

what a year to miss the event

[Brian Dudley]

Sorry you cannot make it OH.

[mike a. gardner]

Very nice, Brian.

[Ben Rawls]

In 1874, the concept of chokes hadn't really been fully accepted, and Im sure a lot of Parkers still had straight walled tubes, or taper bored. Interestingly, I just shot an 1870s Lancaster, with no chokes, at Clays last week and kept right up with the high tech guys.

G T Garwood in his book (Gough Thomas Gun Book) has a chapter entitled "The Myth of Choke". Interesting reading.