- Parker Damascus Resources
- Damascus Barrels
- "copper" color
- Damascus, Anomalies an Variations
- American Crolle Damascus Barrels
- Stars and Bars
- Damascus C Grades
- Damascus Nomenclature
- Drew's Formby's Suggestion
- My First Damascus Refinishing Project
- Bernards
- Correct grade of Damascus for a GH 10 gauge
- Pattern variations from recent restorations
- Damascus poster
- Bernard?
- Liege Damascus Rosetta Stone
- Those crazy Brit's
- These are Damascus barrels-
- Patterns and Variations
- Parker Laminated Steel
- Parker Leads...Others Follow
- Laminated Steel Patterns
- PLAIN STEEL
- damascus type
- phesant load
- Info for a 1891 Parker
- Fine Damascus Guns
- A testament to Damascus
- LC Smith Chain Damascus 10 Gauge Grade 2
- S Grant hammer gun.
- DENT IN BARREL
- More Damascus
- Parker damascus demo
- Parker damascus demo
- is this gun shootable
- Restored GH Damascus
- Iron count
- Question On Safety Of Damascus Bbls
- Bernard Barrels
- Baker Twist
- English or Belgium Four Strand?
- Not quite sure where this thread goes- BUT
- Unique Cleaning Tool
- Help with identification
- Damascus Barrel Wall Scratching
- A great thread on shooting damascus barrels with nitro powders
- I'm No Nash Buckingham!
- 20 gauge chokes
- "Twist" vs. "Plain Twist"
- Parker Laminated Steel Barrels and Guns
- damascus- raised dent
- Case Color Hardening?
- barrel question
- Steel Barrel Choke Constriction For Steel Shot?
- Another New Guy That's Not Sure What He Has - 1889 Parker
- Browning
- 1892 Damascus
- plain steel
- Damascus barrels and turkeys
- Rem 1894 Legia Damascus Barrels
- Damascus Knife Blade
- UMC 12 Ga. Loaded w Laplin & Rand BP
- My New NH....
- The Future of Screw in Chokes
- Remington's policy on shooting Damascus barrels
- Damascus and Early Guns
- Barrel questions
- ALTERNATING TWIST/DAMASCUS
- Terrell Gun
- Rib Artistry
- Smudges Explained
- Blued Damascus Barrels
- Am I correct that #1 12ga GH barrels
- Possible barrel bulge
- Maintaining Damascus Barrels
- Question about damascus barrels and turkey loads
- what grade do i have?
- Parker GH
- 26" barrels rare?
- Spliced on the mandrel?
- BBL Thickness
- C.I.P. Minimum Wall Thickness Recomendations
- Damascus barrels
- damascus cleaning old brown barrels
- Quest
- Winchester Model 97
- Baker Paragon Barrels
- Rem 1894 Barrels
- Barrel evaluation
- Sleeving up a gauge
- possible to make a set of barrels
- My Edwinson Green pattern ,
- How to tell if you have modified chambers ?
- Barrel Analysis
- DID PARKER BLACKEN SOME DAMASCUS/COMPOSITE BARRELS?
- Damascus Barrels
- Syracuse Damascus
- any before and after damascus browning pictures
- Damascus Finishing
- Ribbed composite barrels
- Refinished Composite Barrel Pictures
- Cost of having damascus barrels refinished?
- SLEEVED BARRELS PROOF TESTED...
- SB&C Tubes on non-Parkers
- Reversed chokes : Why?
- Damascus with NO pattern?
- DE-Blueing Damascus Bbls?
- American Flag Bunting Pattern
- Stars & Stripes Damascus
- GH Chamber and Chokes?
- composite confusion
- American Small Arms, 1904
- Damascus colors
- Remington.....
- Mis-matched tube segments
- Choke Gauge Recommendations
- Pre 1900 bore size
- Laminated L2
- Burst Barrel
- Opening Chokes
- Recommendation s for a gunsmith to evaluate Damascus barrels
- barrel Browning.
- Laser welding barrel pits
- 2 7/8" SHELLS IN 2 5/8"
- Shotshell pressures circa 1906
- Composite Barrels
- L.C Smith Question
- Parker made Laminated barrels?
- Rose Melling Damascus
- Damascus hunting knife
- Making damascus bbls
- Damascus Barrels-Shooting Sportsman
- Damascus barrels on C. Ingram SxS
- Scott K's G grade damascus
- Need referral for southern CA gunsmith
- need some advice/opinions
- Loads for my Damascus Parker
- Barrel Weight
- Barrel Striking observation
- Non-Toxic question re: Damascus using gaugemates
- 10 Ga GH Pattern
- Spencer Repeating Shotgun
- Vintage Barrel Steel Composition
- Damascus, Laminated, or... Both?
- Can you identify this?
- Lost and Found
- New barrels in the white, Remington maybe?
- Question about 1929 Sterlingworth barrels
- Minimum Wall Thickness at Point of Proof
- Any Source for X-Raying
- Wild English Laminate
- Damascus Restoration Problem
- Damascus refinishing
- Turkey Hunting
- Damascus Barrel Patch?
- Mini shot shell
- Overbored Ithaca Crass?
- 10ga bore size
- Carding, and boiling at the end
- Rusting Solutions for Damascus Etching
- Need My Damascus barrels evaluated
- Parker Black and White
- Logwood Source
- OT: Crolle Knife
- Original DHE with 31 inch Titanic steel barrels
- Damascus barrel salesmen’s sample
- R. Hanbury 10 bore Sidelock
- Message for Tim Sheldon
- Damascus chambers and steel tubes
- Wall thickness relative to frame size
- Composite Barrel Strength
- From an Old Tractor website
- Damascus crack
- Old time repair
- Damascus Barrels- Type
- Damascus refinishing
- Damascus Refinish Recommendations
- Damascus GH 12ga
- Damascus Rib Pattern
- Damascus Movie on DVD
- Steel or blued damascus ?
- Trio of refinished barrels
- Parker made laminate barrels
- Recommendations for having barrels restored ?
- Buggered Twist PH
- Sporting Classics article
- Name that Pattern
- Bernard "ribbon" damascus patter
- Shooting them?
- Barrel measurements of my "8ga"
- Parker Barrel Maker Samples
- Checking for cracks
- Cut barrels and regulation?
- Cut barrel pics of my GH
- They're Back
- Damascus bbl protective coating
- Rib Art
- Damascus in my future
- Lefever damascus finish original?
- Late Damascus gun?
- Don't give up right away! Cut barrel update.
- Name that Pattern
- Damascus Refinish
- MBWT Data Comparisons (Damascus and Fluid)
- Damascus Dolls Head Material?
- Black or Brown?
- "Overload Proof"
- Interesting damascus knife
- Question on Reblue of Ithaca NID with Ivory Beads
- Brown Patina Conversion
- 320 layer Damascus
- Damascus Pattern Question:
- Twist vs. Plain Twist
- Waiting
- Stub Twist
- Colt 1883 Damascus SxS Rib Solder needed.
- Name that pattern
- Damascus Pattern & Marketing
- Damascus Sample Segments in "The Parker Story"
- Damascus Restoration HEEEEELP
- Gunsmith for Damascus Barreled Parker
- Breck Gorman
- Pitting?
- First Damascus
- Damascus Barrel Wall Thickness Opinions
- Browning Damascus
- Steel shot damage?
- Name this Damascus Pattern:
- Reciever material
- Alternating Damascus/Twist Barrels:
- New to me EH
- Chokes in Damascus?
- No wonder we were afraid of Damascus
- first damascus gun. needing guidance
- Ten gauge Damascus
- Original bore?
- Help ID'ing this pattern
- US damascus barrels patent
- Damascus Identification:
- Laminated
- Steel variation
- J.P. Clabrough Diamond Grade Barrels
- A heck of a blowout!
- Damascus anomaly
- Unusual Dark Finish:
- 1881 Scott Dimple:
- Eye Opener:
- Interesting "Checked Rib" Design
- Thinking about going Damascus
- 20ga 28" damascus barrels needed.