I have been using this load off from the Hodgman website with good success:
Winchester AA hull
1 oz of shot
CB-1100-12 wad
Rem 209P primer
16 grains 700X
5000psi and 1100f/s that I have chronographed myself at 1250/s for some reason...
I have tried the 7/8 oz (actually 24gm) load with 14.5 grains of 700X at 5600psi and 1150 psi with good success also. Problem is that it doesn't crimp very good with the wad made for a 1 oz load and I had to go to an overshot card or a plastic spreader to get good crimps. If I was going to go to load this load much I would go with the 7/8oz CB wad.
Good luck and shoot straight.
Kurt
|
Threaded Mode