Jostam recoil pad

[bob lyons]

I’m looking to replace this Jostam recoil pad.
Currently on a iver Johnson 410 skeeter.
Any help would be appreciated in locating one.
Bob

[Steven Adam Gray]

Originally Posted by bob lyons

I’m looking to replace this Jostam recoil pad.
Currently on a iver Johnson 410 skeeter.
Any help would be appreciated in locating one.
Bob

Connecticut shotgun has reproduction recoil pads

[J. A. EARLY]

Since recoil is not an issue I put the solid red NOSHOC pads on small gauge guns.

https://connecticutshotgun.co/noshoc-recoil-pad/

[Researcher]

The JOSTAM Anti-Flinch was the most popular pad back in the day and it is the one that hasn't been reproduced. Finding a NOS JOSTAM Anti-Flinch is really tough.

Most of the repro pads have been done in the large size with at least a 3 1/4-inch hole spacing and will require a lot of grinding to get down to a .410-bore SKEET-ER size.

[Bill Murphy]

Brian Dudley says he has plenty of small size Jostam pads. He posted this information in the very recent past.

[bob lyons]

Thanks to all for the info
Looking to find the date of manufacture, did seem to find any info
The serial number is S over 2409 E
Only could find from 1927 thru 1947

[Researcher]

The SKEET-ER doesn't appear until after the 1931/2 Iver Johnson catalog. Up to the 1924 IJ catalog the Hammerless Double is only offered in 12-gauge, but some 1924 catalogs have a paste-in adding 16- & 20-gauge and .410-bore.

Hammerless Double Barrel, 1924 catalog with paste-in.jpg

By 1927 they also offered ejectors --

Hammerless Double Barrel, December 1927.jpg

and the 12-gauge vent rib Super-Trap --

SUPERTRAP 12-27 02.jpg

[Craig Larter]

I have new old stock Anti Flinch Jostam pads, what size, how many slots and what is the screw spacing.

[bob lyons]

Thanks Craig
The rough measure of the existing pad is 4-7/8 x 1-5/8
The hole spacing is 3-1/4
The number of slots 7

[Bill Murphy]

I don't see seven slots. Are we discussing a pad not on the last picture?