Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
One think I have learned is the material used to take up stack height makes a difference in pressure. In one load I used four 1/8" 10ga nitro cards as filler, in another, the same except I used a 1/2" fiber wad. The nitro card load averaged 8200PSI, the fiber wad load average 6833psi. Velocities were similar at 1130fps. It must be that the fiber wad is softer and compresses on ignition.
The Following 7 Users Say Thank You to Craig Larter For Your Post:
Threaded Mode