Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
All my Parkers are 12ga. I have been using this recipe for about 7 years. Depending on how your press drops powder, mine drops 17.5 to 18 grains of Clay Dot, Claybuster CB4100 wad which is a 1oz. or 7/8 oz. I only have Remington Nitro hulls and use usually Winchester 209 or Cheddite 209 primers. According to Alliant's web site the pressure is between 7,000 & 8,000 lbs. and right around 1150 to 1200 FPS.
The Following User Says Thank You to Tom Pellegrini For Your Post:
Threaded Mode