Quote:
Originally Posted by CraigThompson
Quite frankly I AM trying to shoot groups and I generally shoot pretty damn good groups with the bigger boys . The 375 H&H is fine from the bench , the 416 Rigby and Rem Mag are okay with a break after two or three 3 shot groups . I will say however I had a Ruger 1H in 458 Win Mag that thumped pretty well , but still shot some decent groups with it when I was working up a load . The 505 Gibbs I thought was going to punish me but in reality it wasn’t as bad as the 458 or so I thought . The guy that owns CH-4D and I had a pretty decent discussion on shooting double rifles and he was an advocate of the standing bench , personally I’ve never cared for a standing bench but to each his own .
|
I was referring to someone that has little or no experience with medium or large bore rifles and is wanting to provide themselves with a good introduction.
And at this first introduction the seated bench is not your friend. Later once you have realized you can squeeze the trigger and not be altered, you can move to the bench and evaluate the rifles accuracy potential and learn all about eye relief and it's importance.
Your friend at CH-4D is absolutely correct when it comes to the use of a standing bench for double rifle regulation and load development. Getting two pipes to shoot to the same point and not cross can be great fun.
Threaded Mode