410 O Frame?

[Dean Romig]

Never heard of a 20/28 on a 00-frame but I know of a few on the 0-frame. Just sayin’ I’ve never heard of a 20 gauge built on the 00-frame.

Maybe Ken can chime in here.



.

[edgarspencer]

Originally Posted by Dean Romig

Just sayin’ I’ve never heard of a 20 gauge built on the 00-frame.

If you're referring to Parker Repros, neither have I, but if you're referring to Parker Brothers, Of coarse you have. We just had a long discussion on this and you sent me pictures of one you knew of, and I had barrels, which are now in the hands of another member who has a couple 00 framed 20s.

[Dean Romig]

Originally Posted by edgarspencer

If you're referring to Parker Repros, neither have I, but if you're referring to Parker Brothers, Of coarse you have. We just had a long discussion on this and you sent me pictures of one you knew of, and I had barrels, which are now in the hands of another member who has a couple 00 framed 20s.

I don’t recall ever referring to a frame size in discussing the ones I know of...

Can you refresh me on that?





.

[edgarspencer]

Originally Posted by Dean Romig

I don’t recall ever referring to a frame size in discussing the ones I know of...

Can you refresh me on that?





.

http://parkerguns.org/forums/showthr...t=26215&page=3
It’s hard to say what you said in this thread as you deleted so many of your posts but in December we were texting about 00 framed 20 gauge guns, Dean Hansen has been posting about his and Austin Hogan had one. All of these were made before the actual “0” designation was developed.