Gunsmith you have used for a Parker and did work you liked

[Craig Larter]

Brian Dudley just finished a set of Super Fox barrels for me and the work is spectacular. The ribs were stripped re-layed, about 8 dents removed, polished and re-blued, the barrels flats finished with the proper polish and file marks. Brian was very sensitive and did not over-polish the original barrel wedge engraving during the re-finish. I added finish to the stock, did a Silvers leather faced recoil pad and Brian lightly re-cut the checkering. It is the middle gun below. I normally don't do project guns but the Super Fox is a CE one of only 22 made.

[B. Dudley]

Originally Posted by Craig Larter

Brian Dudley just finished a set of Super Fox barrels for me and the work is spectacular. The ribs were stripped re-layed, about 8 dents removed, polished and re-blued, the barrels flats finished with the proper polish and file marks. Brian was very sensitive and did not over-polish the original barrel wedge engraving during the re-finish. I added finish to the stock, did a Silvers leather faced recoil pad and Brian lightly re-cut the checkering. It is the middle gun below. I normally don't do project guns but the Super Fox is a CE one of only 22 made.

Craig,
Adding a 0 to that 8 for the number of dents is more realistic. Those things looks like they were dragged behind a truck, more than once. Literally they had at least 2 to 2-1/2 dozen dents in the tubes.