Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Another Short Ten TiteGroup/High Gun pressure test
Before Red Dot became available again, I sent Tom Armbrust a 1 1/8 oz short ten target load with 19.5 grains of Titegroup/High Gun.
Winchester hull trimmed to 2 7/8"
Cheddite primer
19.5 gr. TiteGroup/High Gun
BP X10X seal
BP 1044 Decimax wad
2 16 ga .125 nitro cards
1 1/8 oz 7.5 lead shot
Six fold crimp
This gave a mean velocity of 1223 fps at a mean pressure of 8520.
I am comfortable shooting this load in my Damascus tens, both of which bear superior proofs, but might reduce the powder by a grain.
Another Short Ten TiteGroup/High Gun pressure test
Threaded Mode