I Have A Parker

[Lee Weiss]

Hi all,

Thanks so much for your responses so far. I have enclosed more pics. Hopefully that will tell more about the ejector situation. I would have that repaired although I doubt I will hunt with it. Maybe trap and skeet just to say I have shot the gun or maybe not.

As far as the serial # goes, the # on the stock matches and the barrel assy on the side has a matching #. So is the # I referenced off of the date code mfg sheet not correct or did I mis-interpret something here.

The pictures attached show the ejectors
#93 shows ejectors, is this picture detailed enough?
#94 shows the bottom of the stock and the S/N is engraved on there
#97 shows the S/N on the side of the barrel assy.
#98 Is the straight stock. Is it that much different fro a traditional stock.
#99 shows the pitting on the barrel, a little up by the breech and some about 6 inches down the barrel fron that particular pitting spot. that is the worst of the pitting the gun shows.

Thanks again

Lee