Hello Gustav; and Welcome to the forum,Everyone on here will tell you ,you will need a lot more info. before you receive very much advice , you will need to know the serial # of the gun ,if it is listed in the serialization book most here will be able to tell you how it left the factory ,Barrel length ,grade of the gun etc.,as far as the Damascus barrels ,you will need a competent gunsmith to check the bores for pitting and barrel wall thickness etc. to make sure it is sound ,and even then you will or should buy low pressure loads to shoot ,I would suggest starting with the serial # and pictures if possible and you will soon get a very good idea if this is a gun you want to pursue ! Good luck with your purchase ! Russ
|