View Single Post
Another Short Ten TiteGroup/High Gun pressure test
Unread 01-17-2026, 02:17 AM   #1
Member
Laurence Frank
Forum Associate

Member Info
 
Join Date: Nov 2018
Posts: 11
Thanks: 2
Thanked 11 Times in 5 Posts

Default Another Short Ten TiteGroup/High Gun pressure test

Before Red Dot became available again, I sent Tom Armbrust a 1 1/8 oz short ten target load with 19.5 grains of Titegroup/High Gun.

Winchester hull trimmed to 2 7/8"
Cheddite primer
19.5 gr. TiteGroup/High Gun
BP X10X seal
BP 1044 Decimax wad
2 16 ga .125 nitro cards
1 1/8 oz 7.5 lead shot
Six fold crimp
This gave a mean velocity of 1223 fps at a mean pressure of 8520.

I am comfortable shooting this load in my Damascus tens, both of which bear superior proofs, but might reduce the powder by a grain.

Short Ten High Gun test redacted.jpg
Laurence Frank is offline   Reply With Quote
The Following 5 Users Say Thank You to Laurence Frank For Your Post: