Quote:
Originally Posted by Eddie Taylor
Reading 6pt-Sika's post, I want to make sure I am understanding this, using WSH, 21.7 gr for this load. Is that right?
|
Nope not 21.7 I use the #20 bushing and the table says I think 18.6 grains I’ve never bothered to weigh it . Seems to me I used the same charge with 1 1/8 ounces and just changed the displacement wads a bit . I’ve done this loading for 1 or 1 1/8 in both Cheddar and REM hulls using SP-10 and the BPI only thing that changes is the displacement wads . And granted this is what I’ve done for myself I’m
Not advocating anyone use my data but it’s worked for me . Use at your own risk . I kinda work on the premise of it went thru a 12 gauge hole and the pressure wasn’t great going thru a larger 10 gauge hole it should be no greater than and most likely a bit less pressure wise . Now one day that might jump up and bite me but I kinda doubt it .