Parker 12g field thorough cleaning and restoration
 

Hi all. I am looking for resources for disassembly and cleaning of a 1902 parker 12g P grade. It locks up fairly well with a slight wiggle and the lever slightly left of center. It doesn't dry fire. I suspect it's not cocking as it likely hasn't been fired since the early 80s.

My plan is to clean it and restore it. I don't have much in the area for gunsmiths although there is someone 3 hours from me. I have restored a few firearms and can do most basic work that doesn't require specialized tools.

Any information would be welcome.

Rick.

The only special tools you'll need are a proper set of gunsmithing screwdrivers.





.

Got those. Is there an exploded parts diagram kicking around anywhere?

I don't have an exploded view of the parts but here is a cut away view that might help.
If the link doesn't work the drawing and numbered parts list is available on the PGCA Home Page under "Technical Information".

https://parkerguns.org/images/tech_2.jpg

Thanks David. That helps quite a bit. Time for a screw driver and a camera.