12ga GHE 30" Vent Rib
 

I recently bought this gun and this is the place with the experts, so I'm looking for information and comments on this gun. I also bought a British proofed 20ga VH I'll reference in a different post.

Here's what I have: Based on my search so far this appears to be a pretty rare configuration.

Serial # 216741

30" vent rib barrels with 2 ivory beads. Choked about -.030" and -.035" per my Bore gauge. I can not find a ser number engraved under the rib.

Ejectors.

Barrel marked "Parker Bros Makers Meridian CT USA Parker Special Steel

Frame 1 1/2? See pics the 2 is very faint. Measures 1.116 between firing pin holes

Straight stock w matching numbers on long tang.

Hart recoil pad.

Single Selective trigger which I believe is the Factory version

https://i.imgur.com/Qv7Y0eJ.jpg

https://i.imgur.com/H4d5Jn1.jpg

https://i.imgur.com/q9kbQCK.jpg

https://i.imgur.com/y1Q4nVe.jpg

More pics:

https://i.imgur.com/qmYcvRC.jpg

https://i.imgur.com/6e6yHEZ.jpg

https://i.imgur.com/r48OuCE.jpg

https://i.imgur.com/kXK1V5k.jpg

Definitely a 1 1/2 frame.

GHE Vent Rib
 

Order a letter if one is available. That should provide good information.

10-4.

The serial number search indicates there is information available, so I'm working through the on-line letter request.

Any comments on condition and approximate value would be appreciated also.

https://i.imgur.com/KFA31mR.jpg

That thing’s got some chokes!!!





.

I’d call it light full and full.

That rib serial number is usually just the last three digits and is stamped into the underside of the rib between the second and third posts. You’ll need a thin inspection mirror to find it.





.

Welcome to the forum!

Positives-It does appear to be a proper vent rib Parker. Vent rib guns come to market fairly often. The Guyette & Deeter auction coming up has at least 4 that come to mind, maybe more than 4. So they aren't rare but they are uncommon. Gun appears to be in good condition.

Negatives from my perspective. The dolls head doesn't fit properly. The barrels have probably been adjusted causing that issue. Doesn't affect how the gun shoots, just an indication of some past adjusting. A letter might mention that the gun was ordered with a recoil pad.

Stock dimensions would also impact value to most buyers, as would barrel length and condition of the barrels (bore condition, wall thickness etc).

Nice Parker that should be a pleasure to shoot!

What kind of "barrel adjustment" can cause the outrageous gaps in the extension rib. The only adjustment I can think of is an adjustment with a file, or a barrel replacement. Where is the picture of the left side of the barrel lug? I would want to see the serial number on the lug. A vent rib Parker that is not configured as a target gun is an interesting variation. Tapered rib is neat. Wood is nice, original finishes in wood and metal are gone.