Quote:
Originally Posted by Steven Gray
Ill try that im quite sure the barrels where fully opened because the right side flew out.
|
Each ejector is timed individually. If that left barrel ejector fires just a few degrees of arc early the rim of the shell could hit the very top of the breech and pop back toward the chamber. Meanwhile the right barrel with ejector in time ejects the shell properly.
Timing of the ejectors is not for those without very deep experience AND with available parts. You can try the solvent, again I doubt it will work, and if the problem persists it will take an expert to fix it. As posted here earlier many otherwise excellent 'smiths decline to work on Parker ejectors. Sorry I don't have any suggestions.
Here's what can happen to a Parker ejector "Floating sear". The center hole is worn oblong, the sear is cracked and there should be a small notch at the crack area that's now worn down but originally like the one opposite it.
.
Threaded Mode