Ejector problems 🙈

[Steven Adam Gray]

Originally Posted by Keith Doty

Steven, you might try removing the wood from the fore end then soaking the mechanism with Kroil. Let it sit overnight then blow it out and LIGHTLY lube it, blow again gently. Make sure no "drippy or runny" oil remains before reassembly. I have done this with one of mine that had very sluggish semi-functioning ejectors. I was cured! I have had very good success with Kroil over the years on "sticky" mechanisms. Keep it off the wood.
As far as disassembling the ejectors, it is only for the brave! Most gunsmiths run for the hills when you say "Parker ejector issues".

What kind of lube do you suggest?