Patterning

[Stan Hillis]

Originally Posted by Randy Roberts

Of course that does not explain why I can see more of the rib on this one vs other guns and still shoot spot on, back to the quandary I suppose.

That's the part that's buggin' me. I've never shot a gun that shot flat for me when I was looking down on the rib. But, rules are made to be broken. Now, I'll start second guessing myself when I pass on a nice shotgun stocked high for the traps, or such. Livinlearn.

Originally Posted by Harry Geitler

If the gun is shooting low when you are looking over the ''Rib'' its just one thing,
''the barrels are bent downward'', that's it!

Pitch plays into it too, Harry.

[Double Lab]

For me, pitch plays more of a role in keeping the gun on my shoulder after recoil. I have a PAC Fox 32" gun in which I see way more rib than I would like but it too shoots where I look. Then again I've had guns that when mounted look perfect but I just couldn't be consistent with it. Go figure.

[Randy Roberts]

Perusing through the information as provided by Dr. Drew I see that in the first 12 tournaments in the Interstate Association in 1914 a recognizable Gent by the name of W. R. Crosby was near the top of the leader board with an average of .957 while Mr. Cragg was at the other end of the board with an average of .705, both listed as "Professionals". One thing is for certain he was not shooting the 1915 DHE in question at that point in time. Possibly his lackluster scores lead to the ordering of this 34" gun.

[Drew Hause]

Crosby was certainly one of the turn-of-the-century "Top Guns"; along with Fred Gilbert, J.A.R. Elliot and Rolla Heikes.
He was a representative for Baker Gun & Forging from at least 1897 until 1899, twice winning the “E.C.” Target Championship of America, first with a “$30 Baker Hammerless” B grade, then with a Paragon. He won the “Review Cup” from J.A.R. Elliott in October 1899 killing 98/100 live birds.
In 1900 he won the Sportsmen’s Association Championship Trophy held on the Madison Square Garden roof under the auspices of the Sportsmen's show March 1-17.

After the first GAH at Targets in June he changed to a L.C. Smith and was part of, and High Gun, in the victorious American team in the June 1901 Anglo-American Clay Bird Match.

In 1904, Crosby ordered through Capt. duBray a 20g VH, 30” barrels with F/F chokes, no safety, LOP-14”, DAC-1 3/8”, DAH- 2 1/4”, Pitch-2 3/4’, Weight- 6lb-10oz., Chambers- 2 7/8”, RH trigger- 3 1/2lb, LH trigger- 4lb.
The Parker records include the notation “Send Bill - Compliments of Parker Brothers”. (Courtesy of Daryl Corona)
He continued to compete with his Smith, and the gun may have been for Mrs. Crosby.

At the Philadelphia Eastern Handicap July, 1906 he was using a Parker with 32” barrels.

Lots more here
https://docs.google.com/document/d/1...c/edit?tab=t.0

[Double Lab]

In 1904, Crosby ordered through Capt. duBray a 20g VH, 30” barrels with F/F chokes, no safety, LOP-14”, DAC-1 3/8”, DAH- 2 1/4”, Pitch-2 3/4’, Weight- 6lb-10oz., Chambers- 2 7/8”, RH trigger- 3 1/2lb, LH trigger- 4lb.
The Parker records include the notation “Send Bill - Compliments of Parker Brothers”. (Courtesy of Daryl Corona)

I still have this gun and if the gun was for Mrs. Crosby she was built like me () because if I was ever to have a gun custom made for me I would use these measurements. It's one of those guns I can just pick up break targets with.

Thanks for the reminder Drew.

[Drew Hause]

I haven't found much on Mrs. Crosby, but she did compete. The first Ladies Amateur National Championship was at the 1916 GAH in St. Louis, won by Mrs. D.J. Dalton; Miss Harriett Hammond 2nd
https://digital.la84.org/digital/col...oll17/id/22498
Day 2 Ladies Special Event
Mrs L.G. Vogel
Mrs H. Almert
Miss Harriett D. Hammond
Miss L. Meusel
Mrs D.J. Dalton
Mrs. F.A. Johnson
Mrs C. Edmiston
Mrs H.L. Patter
Mrs J.L. Hooper
Mrs W.R. Crosby
Mrs D.B. Foster
Miss E. Wettleaf
Mrs A. Killam

BTW she was one of the wives to accompany (keep an eye on ) her husband to the 1901 Anglo-American match

American Team Departs May 26
The team will consist of the following shots: Capt. Thos. Marshall, R.O. Heikes, W.R. Crosby. C.W. Budd. J.S. Fanning, J.A.R. Elliott, F. Gilbert. F.S. Parmelee, C.M. Powers, Edward Banks, E.H. Tripp, Richard Merrill, and B. Le Roy Woodard.
Others with the team are: Capt. A.W. Money, Emil Werk, D.F. Pride, D. Erhardt, Fred. Elliott, and Frank Harrison.
The ladies of the party are Mrs. Banks, Mrs. Crosby, Mrs. Tripp, Miss Werk and others.

[Double Lab]

Wow, a bunch of heavy hitters there. Very cool Drew, thanks.

[Steiner]

Originally Posted by Drew Hause

I haven't found much on Mrs. Crosby, but she did compete. The first Ladies Amateur National Championship was at the 1916 GAH in St. Louis, won by Mrs. D.J. Dalton; Miss Harriett Hammond 2nd
https://digital.la84.org/digital/col...oll17/id/22498
Day 2 Ladies Special Event
Mrs L.G. Vogel
Mrs H. Almert
Miss Harriett D. Hammond
Miss L. Meusel
Mrs D.J. Dalton
Mrs. F.A. Johnson
Mrs C. Edmiston
Mrs H.L. Patter
Mrs J.L. Hooper
Mrs W.R. Crosby
Mrs D.B. Foster
Miss E. Wettleaf
Mrs A. Killam

BTW she was one of the wives to accompany (keep an eye on ) her husband to the 1901 Anglo-American match

American Team Departs May 26
The team will consist of the following shots: Capt. Thos. Marshall, R.O. Heikes, W.R. Crosby. C.W. Budd. J.S. Fanning, J.A.R. Elliott, F. Gilbert. F.S. Parmelee, C.M. Powers, Edward Banks, E.H. Tripp, Richard Merrill, and B. Le Roy Woodard.
Others with the team are: Capt. A.W. Money, Emil Werk, D.F. Pride, D. Erhardt, Fred. Elliott, and Frank Harrison.
The ladies of the party are Mrs. Banks, Mrs. Crosby, Mrs. Tripp, Miss Werk and others.

I have a straight grip, C Grade 12 gauge gun that was ordered for Capt A. W. Money by his son. He ordered an identical gun for himself.

[ArtS]

Originally Posted by Stan Hillis

That's the part that's buggin' me. I've never shot a gun that shot flat for me when I was looking down on the rib. But, rules are made to be broken. Now, I'll start second guessing myself when I pass on a nice shotgun stocked high for the traps, or such. Livinlearn.



Pitch plays into it too, Harry.

It can happen though. Just out of graduate school in 1972, I traded an Ithaca M51 Trap with a sawed off barrel (cousin's wife's gun that she shot at a dove with a corn stalk in the barrel) for a 1948 Ithaca 16ga field grade with a high grade stock (finishing up guns with available parts). I had been thinking of a classic double and they were cheap at the time. Took it out for its first trip and hit not one thing. I patterned it and both barrels were dead 18" high at 30 yds. This with a gun with 2-3/4" drop. It also had very light barrels. I thought a little and took a towel and wrapped around the center of the barrels. I was at an abandoned concrete plant near my house found a tough looking small tree that hat a vertical narrow V fork in a low limb. I put the barrel with the towel in the fork and bumped it hard on the top of the action. Three tries at this and it patterned perfectly. With light barrels it is easy to bend a set of doubles up or down. This went on to be my lifetime regular dove gun.

I knew nothing of Parkers at the time and hadn't seen pictures of them truing barrels in the factory. What prompted me to try (besides money) was I had a Weatherby gun catalog that showed a picture of a worker truing rifle barrels in their German factory. I figured if you could bend and adjust a rifle barrel in a press with a 4" handwheel crank, bumping a shotgun barrel enough to get a pattern right should be easy.

The same wouldn't work, of course, if you start with a straight barrel. Then the pattern would depend on distance.

[Stan Hillis]

Originally Posted by Harry Gietler

I have spent over 45 years bending shotgun barrels for people. It is very easy,but you have to go easy, you don't want to ''Kink'' them. I have seen barrels get bend by guys sitting on them while the gun was in a case on the back seat of a car. It only takes a few degrees, they don't look like a ''Crossbow''. Most of the bending was for slug shooting for deer hunting. The hardest to bend were Ithaca 20in. slug barrels.

Harry


.

I have seen it done too, Harry. But, there's a difference in making a gun shoot to where you want it to by bending a barrel, as opposed to finding out why it's shooting that way in the first place.

Bending a barrel makes one shoot where you want it to at a specific range. Less than that distance and it's off, and more than that distance and it's off in the other direction.

My opinion is that, if possible, it's better to correct the issue on the back end of the gun than on the front end. Read Oswald's book and you might agree. Or not.