Is this a Miller SST?

[PML]

Originally Posted by Linn Matthews

My VH has a single trigger. The trigger selector is mounted on the stock behind the barrel release lever--it has a slide selector which starts at "L" on the bottom, slides to "S" in the middle and goes to "R" at the top

Does this suggest what "brand" of single trigger it is?

Thanks,

Linn

Linn,
Your description is of an early Miller Selective trigger. The barrel selection was integrated into the Safety by Miller. These are my favorite Miller triggers. Some despise them for the rough stamping of R/L that Miller put on top tang of the Parker gun. They work very well and I consider them a premium on a Parker gun.

Patrick

[10 bore]

i have a 12 ga trojan with a miller that has the rocker selector in front of the trigger, i like this ,it is ez to get at and the trigger is nice and wide for your finger to fit on it with or with out a glove on, scott

[Autumn Daze]

So let me see if I have this right. There are three variations of the Miller single trigger. 1)Slide selector mounted rear of opening lever.2)Non-selective trigger3)Safety slide mounted selector. Did Miller ever use a trigger plate mounted selector similar to Parker?

Jim K...I would think Dave Noreen would have some info on the Infallable trigger.

[Drew Hause]

Linn: does your trigger look like this Infallible?





The tang safety slide is the barrel selector for (one of) the Millers



Miller with selector by trigger