Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/boards/index.php)

- Parker Hammer Guns (https://parkerguns.org/boards/forumdisplay.php?f=14)

- - 1874 12ga Under lifter (https://parkerguns.org/boards/showthread.php?t=45969)

Thanks! How could I have forgotten about Track of the wolf. I'll double the threads and see what I have

Looks like this is going to end up being a wall hanger for the time being. To make it look at least half way decent, I would like to try to replace the fore end wedge. Does anyone have the dimensions or where I can get a wedge that I can use?

Thanks,

JC Duchock

I likely have a couple correct wedge keys in the parts drawers.

I bought a bag of those screws and they have worked on a few older guns. They seem to be made long to be shortened to regulate the screw. In one case, I think the hammer surfaces had been polishe to the point that they had introduced a little looseness.

Quote:

Originally Posted by Jay Oliver (Post 444521)

Joseph,

I have saved many of these. The barrels are cut, but may be usable. Some soldier in those muzzles would help and make it look better. I have a set of 20" damascus barrels that were cut and work fine. How are the bores? Any pitting?

The price of that hammer screw on EBay is a little steep. There are one or two different threads. I have had some hammer screws that were interchangeable and some that wouldn't work.

Try these first; https://www.trackofthewolf.com/parts...4-40-parker-tx

It is nice to bring one back. Good luck and feel free to reach out with any questions.