printing block

[Dean Romig]

Everything about it says "Parker Bros." to me. The shape of the doll's head, the shape of the lug, The lever and bolt, the cocking hook in the lug... it all looks to be Parker Bros.

[Pa SxS]

Rick,

Here are some dimensions taken off my hang tag.

1. Distance between the end of the top tang down to the bottom of the floor plate tang = 26/32"
2. Distance from the top of the vertical line marked A, straight down to the bottom of the floor plate = 1 26/32"
3. Distance from the top end of the dolls head extension straight down to the end of the barrel = 2 15/32"

Everything about it looks correct compared to the hang tag.

[OH Osthaus]

Originally Posted by Chuck Bishop

Rick,

Here are some dimensions taken off my hang tag.

1. Distance between the end of the top tang down to the bottom of the floor plate tang = 26/32"
2. Distance from the top of the vertical line marked A, straight down to the bottom of the floor plate = 1 26/32"
3. Distance from the top end of the dolls head extension straight down to the end of the barrel = 2 15/32"

Everything about it looks correct compared to the hang tag.

Thanks Chuck
those measurements match the plate