 |
|
 |
|
 |
|
 |
| Notices |
Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register:
Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account!
To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
John D.
|
 |
01-22-2012, 02:12 PM
|
#1
|
Member
|
PGCA Invincible
Life Member
|
|
Member Info
|
Join Date: Dec 2008
Posts: 34,044
Thanks: 41,327
Thanked 38,133 Times in 13,823 Posts
|
|
Bill, the break is obvious in his first picture. Looks like it was broken at the first screw hole on the bottom tang or rear part of the floor plate.
|
|
|
|
|
01-22-2012, 08:51 PM
|
#2
|
|
Member
|
|
|
|
Member Info
|
Join Date: Oct 2011
Posts: 62
Thanks: 0
Thanked 81 Times in 23 Posts
|
|
Bill, The plate was broke when I bought the action. I'll bet someone didn't take the top tang screw out and tried to pry off the trigger plate. Broke through the little hole that the trigger lift spring screw goes in. Will cut it off in front of the screw hole and cut one from another plate and weld on, thus saving the origional plate with the engraving matching the action. Got the release lever but no forend, get it all together have a local gun that can engrave the forend iron to match D grade engraving. Just need time and energy. Regards, John Hancock
|
|
|
|
|
Hybrid Mode