1874 12ga Under lifter

[Jay Oliver]

Joseph,

I have saved many of these. The barrels are cut, but may be usable. Some soldier in those muzzles would help and make it look better. I have a set of 20" damascus barrels that were cut and work fine. How are the bores? Any pitting?

The price of that hammer screw on EBay is a little steep. There are one or two different threads. I have had some hammer screws that were interchangeable and some that wouldn't work.

Try these first; https://www.trackofthewolf.com/parts...4-40-parker-tx

It is nice to bring one back. Good luck and feel free to reach out with any questions.

[ArtS]

I bought a bag of those screws and they have worked on a few older guns. They seem to be made long to be shortened to regulate the screw. In one case, I think the hammer surfaces had been polishe to the point that they had introduced a little looseness.

Originally Posted by Jay Oliver

Joseph,

I have saved many of these. The barrels are cut, but may be usable. Some soldier in those muzzles would help and make it look better. I have a set of 20" damascus barrels that were cut and work fine. How are the bores? Any pitting?

The price of that hammer screw on EBay is a little steep. There are one or two different threads. I have had some hammer screws that were interchangeable and some that wouldn't work.

Try these first; https://www.trackofthewolf.com/parts...4-40-parker-tx

It is nice to bring one back. Good luck and feel free to reach out with any questions.