Reloading set up pics

[Woodcock survey]

For 28 and 410 yes, 3/4 and 7/8 12 ga. yes they are not available. 10 ga. yes. I shoot a lot of odd ball loads that are not commercially loaded and some of my components are pre panic bought. I also load very mild loads which would be expensive when available. also spreader loads.

[Mike of the Mountain]

Now that the 8g press and RCBS swage is set up. I'll show and tell too.....

Photo 1- Lead bullet casting, black powder rifle and black powder shotshell stuff.

Photo 2- L to R, 8, .410 and 28g MECs

Photo 3- L to R, 20, 16, 12 and 10g MECs.

Photo 4- L to R, Super Sizer, drill press for roll crimping, Spolar Gold

Photo 5- what you can see in the rifle powder/bullet/primer cabinet

[Mike of the Mountain]

Part 2.....

Photo 1- Hull Conditioner and Dillon 570

Photo 2- Rifle bench, L to R, RCBS press, Lyman press, Lyman Turbo-Tumbler, Lyman case processor, bench top cut off saw, case trimmer

Photo 3- RCBS Rock Chucker Supreme press and C&H 8g swage dies

Photo 4- Primers/powder/wads

Photo 5- Primers/powder/wads/shot

Not to worry, plenty more components that are on other shelves and cabinets.