28 ga Repro

[Dean Romig]

That sounds more like Q1 & Q2 chokes to me but I’ve heard of other Repro chokes that didn’t measure to correspond with the choke stamps on the flats.





.

[Wild Skies]

For comparison purposes my 28ga. DHE factory stamped IC/M chokes measure .006/.016. I am the original owner having purchased the gun new from Cape Outfitters at the closeout in 1995. The chokes are un-touched original.

[edgarspencer]

My 26", marked IC & Mod, measures .011" and .020". That sure looks like Mod & Full to me.

[Scott Gentry]

Originally Posted by edgarspencer

My 26", marked IC & Mod, measures .011" and .020". That sure looks like Mod & Full to me.

The charts I have reviewed mine is Skeet/ imp. Mod.

[Double Lab]

I can't comment on a the reproduction chokes but I learned over many years of shooting 28 gauge guns that you are much better off ballistically with tighter chokes.

[edgarspencer]

Originally Posted by Daryl Corona

ballistically

Damn! He is good too

[Wild Skies]

Originally Posted by Daryl Corona

... ***snip*** ... I learned over many years of shooting 28 gauge guns that you are much better off ballistically with tighter chokes.

Would you please expound on this a little more?

[Double Lab]

Sure will Greg. First off this is my experience after shooting two original Parker 28's for 40+ years. My 26" VH measures .011/.20 and the 30" measures .012/.022. I believe that smallbores benefit from tighter chokes. That's just my observation. I know that a few members here have shot the 30" gun and shot it lights out. Just ask Chuckie B.

Now for the reason I say that. I have a high end 28ga o/u with choke tubes. I started out with .004/.013 and just wasn't happy with the target breaks or the lethality on live birds. I ended up screwing in .014/.026 tubes and it changed the whole complexion of the gun.

Once again this is just my opinion.

[Kevin McCormack]

Originally Posted by Daryl Corona

I can't comment on a the reproduction chokes but I learned over many years of shooting 28 gauge guns that you are much better off ballistically with tighter chokes.

Exactly, precisely right!! Also depending on the make and vintage of the gun, certain ones LOVE certain shot sizes. I owned 2 Parker 28 gauges, both early Meriden guns, one 26" and the othere 28". They both loved 7 1/2 shot, "liked" #8s, cared less for #9s and hated anything larger than #7s.

A Parker Repro 28 I owned for a while choked SK1 & SK2 didn't particularly "like" any conventional sized shot but would pattern #10 shot handloads I "put up" for railbirds like broadcasting tobacco seeds. An absolutely lovely little R15 Darne 28 gauge I shot for a while with 25" barrels was so deadly using #8s I was invited to "not bring it" on several game farm quail hunts; the same gun would homogenize skeet targets from any station with standard #9 loads.

Now I'm down to one Belgian Browning Superposed 28" Pigeon Grade 28 bored M&F, one 28" Citori 28 with Invector chokes, and one AH Parker 26" 28 (It's a 16 ga. 0 frame Briley full-length tubed to 28 ga with their choke tubes because the Damascus barrels are so rotten inside they're unsafe to shoot). Decisions, decisions........