Reloading using 7 1/2 shot with MEC 410 Grabber

[Paul Wilczynski]

A bit of clarification. The shot is flowing out of the bottle fine. It is hanging up in the drop tube I believe where it narrows down in order to fit in the wad. Usually more than half the shot does drop. The rest hangs up in the tube.

[JAMES HALL]

I had same problem in a 20 ga. Mec help was to put baby powder in shot. It worked. Don't need much.

[Bill Murphy]

Baby powder is one fix. An added fix is to wax the inside of the tube with Johnson's Paste Wax and shine it up good. Make sure that the tube is as large on the inside as it can be.

[6pt-Sika]

I had the same problem in a 9000 28 gauge when I went to #6’s or #4’s .