The Cheddites Rims are thin MEC 600 will bend them if the small ring is not perfectly clean. I had trouble closing my 10 G guns sometimes. Finally traced it to bent rims. The Ponsness Warren die supports the case during sizing & as designed eject on the loaded shells mouth preserving rims shape.
Problem is PW 375 is not easy to set up for short. I made a Delrin knock out rod that lets me eject a primed not charged case from the inside without touching the fresh primer. That works but is slow.
Brass sounds good but has it’s own set of issues, one that keeps me from brass is cost to load large Volume. 10 I run 400 at a time. 40O brass cases cost more that a good Parker 10
I hit the mother lode 2 1/2 inch 16 Cheddites can live with short case life until they run out.
William
|
Threaded Mode