GunBroker SCC

[nid-28]

Well--in all honesty---I glanced too quickly at the original posting and did not realize it was a factory choke tube gun. Yes--at the opening price--I would consider the gun a good buy. There are some nicks in the wood, but overall the gun is nice. They used Win-chokes and back in this era, all barrels with choke tubes had to be enlarged/expanded at the muzzle to use them. Since there is NO reserve--pop a bid on and you may get lucky. I expect there will be lurkers who show up in the last hour of the auction. Good luck. BD

[Wild Skies]

Originally Posted by Bill Davis

Well--in all honesty---I glanced too quickly at the original posting and did not realize it was a factory choke tube gun. Yes--at the opening price--I would consider the gun a good buy. There are some nicks in the wood, but overall the gun is nice. They used Win-chokes and back in this era, all barrels with choke tubes had to be enlarged/expanded at the muzzle to use them. Since there is NO reserve--pop a bid on and you may get lucky. I expect there will be lurkers who show up in the last hour of the auction. Good luck. BD

Finally . . . logic has been added to this thread!

A Parker Reproduction Sporting Clays Classic is my nominee for the most versatile Parker on the planet. 3" chambers, chrome lined bores and choke tubes with the capability of shooting virtually any 12-ga. load offered today -- all in one gun, makes it so. Add in the fact that there were reportedly only 125 SCCs produced, makes this particular model (dare I say?) rare and collectible.

[GH-16]

Originally Posted by Greg Baehman

Finally . . . logic has been added to this thread!

A Parker Reproduction Sporting Clays Classic is my nominee for the most versatile Parker on the planet. 3" chambers, chrome lined bores and choke tubes with the capability of shooting virtually any 12-ga. load offered today -- all in one gun, makes it so. Add in the fact that there were reportedly only 125 SCCs produced, makes this particular model (dare I say?) rare and collectible.

I've looked the auction information & gun over for details. I see no where the seller states this one is a SCC & the poor pictures don't let me see any specific marking to verify it as being a SCC. I do assume that because of the win-chokes that it probably is one, but I would request better pictures of the gun to see if there is any markings to suggest it is a true SCC. I do see the choke stampings on the barrels and though the pictures are fuzzy, I think they indicate the interchangeable choke tubes.

Greg, I think you might have the SCC mixed up with the steel shot special. This gun is clearly marked for 2 3/4" chambers the SSS would have the 3" chambers and fit your description of the overall most versatile Parker Repro.

[Victor Wasylyna]

Originally Posted by Paul Ehlers

I do see the choke stampings on the barrels and though the pictures are fuzzy, I think they indicate the interchangeable choke tubes.

The “ISC” on the barrel flats tells us that this indeed is a Sporting Clays Classic. (“internal Screw Chokes.”) I own one. Use it weekly. Love it.

-Victor

[Victor Wasylyna]

Originally Posted by Greg Baehman

Finally . . . logic has been added to this thread!

A Parker Reproduction Sporting Clays Classic is my nominee for the most versatile Parker on the planet. 3" chambers, chrome lined bores and choke tubes with the capability of shooting virtually any 12-ga. load offered today -- all in one gun, makes it so. Add in the fact that there were reportedly only 125 SCCs produced, makes this particular model (dare I say?) rare and collectible.

Maybe it’s a 1980’s thing, but where are the 30+ inch barrels? I love my 28 inch SCC, but longer barrels would make the love more like momma’s love.

-Victor

[Wild Skies]

Originally Posted by Victor Wasylyna

Maybe it’s a 1980’s thing, but where are the 30+ inch barrels? I love my 28 inch SCC, but longer barrels would make the love more like momma’s love.

-Victor

It has been reported in these pages that there were 25 12-ga. 30" Parker Reproduction barrel sets made. These 30" barrel sets were made available and could be added onto any 12-ga. Repro. To my recollection three different posters here on the forum have discussed having them added to their SSSs, two of the three poster's 30" barrel sets have had Briley aftermarket choke tubes installed -- both of these posters have listed them for sale within the last 12 months here on this site in the For Sale forum, one of them is just the 30" barrels only, the other is a complete 2-bbl. set. To my knowledge these are still available. The 3rd poster told us he hasn't found the need or opportunity to shoot his factory choked M/F 30" barrel set much. Where the other 22 30" original PR barrel sets are remains a mystery.

There was also a 4th poster that claims there is at least one set of 32" Parker Reproduction barrels in existence and a friend of his owns it. When questioned of its authenticity the poster says the barrels are "Skeuse all over". But, unfortunately this 32" barrel set remains unverified.

[George M. Purtill Member #28]

Originally Posted by Greg Baehman

There was also a 4th poster that claims there is at least one set of 32" Parker Reproduction barrels in existence and a friend of his owns it. When questioned of its authenticity the poster says the barrels are "Skeuse all over". But, unfortunately this 32" barrel set remains unverified.

As you know Greg, a lot of people talk about a lot of stuff on this Forum that they have SEEN. But talk is cheaper than dirt. SHOW ME.

[Wild Skies]

In an effort to try and help the seller of this Parker Reproduction Sporting Clays Classic in regards to identifying what he's selling and informing him of what we've learned about a Parker Repro SCC's actual chamber length, here's his response:
"Thank you for the information, but a shotgun that the chamber measures 3 inches is for a 2&3/4, a 3&1/4 is for a 3inch shell and a measure of 3&3/4 is for a 3&1/2 the extra space is for the shell to open when fired."
In regards to Parker Reproductions specifically . . . . who's right and who's not quite right?

[Johnny Johnson]

The ANSI spec for a 2 3/4" smooth bore chamber is a minimum of 2 3/4" deep to the start of the forcing cone and a maximum of 3". A link to the specs can be found on the following page:

https://saami.org/technical-informat...amber-drawings

Hope that this helps.(But I suspect that it won't.)

Later,
Johnny