Quote:
Originally Posted by Dean Romig
Somebody please correct me if I'm wrong, but I believe I read somewhere that the dimension between firing pin centers of the 0000-frame and the 000-frame are exactly the same and the only thing that makes it a "0000-frame" is the number of zeros stamped on the lug.
|
It's reported in
The Parker Story that the distance between the firing pins of a 000-frame Parker is 13/16", it has also been stated (but not verified) that a 0000-frame Parker Reproduction has this same dimension between the firing pins. Well, on the net today I just happened to come across a couple of pics of a 000-frame Parker and it got me to wondering whether or not they are the same? Take a look at these pics and compare the little nuances and differences . . . the 1st is a 000-frame Parker, the 2nd is a 0000-frame Repro, the 3rd is the Parker again and the 4th and 5th pics are the Repro again. There is a step down of the barrels on a 000-frame Parker which the 0000-frame Repros do not have and it appears that the Repro barrels are more
internal to the frame than the 000-frame Parker. What conclusions can we draw from this? It could be: A) The pin separation is not the same, or: B) the frame dimensions across the watertable at the breech and hinge of the Repro are greater than the 000-frame Parker. What do you think? Anyone have 0000-frame Repro that they can measure to verify?
Threaded Mode