Galazan .410 bbls for 28 ga Reproductions

[Dean Romig]

You're right Dave but I'm not sure it would make any difference which Repro frame they are fitted to. Barrel sets will usually fit between one Repro to another - the greatest issue might be the position of the lever, there being only the difference of one or two thousandths of an inch involved in 1/2" in lever position.

Describe the problem you are having in lock up?

[Rod N. Gunn]

I've complained about this problem a number of times on this board and I hate to do it again but these barrels make me so d*** angry I'll do it one last time. Photo below shows the gun when its closed (you can see the barrels are tight on the breech). The only way to get the lever over is to slam the gun shut or wiggle and giggle the lever till it moves over. I paid to have them fit to my gun and here's what i got. Seller does not respond to emails or phone calls.

[Bill Murphy]

Greg, popular legend has it that 500 Repros were sent to Krieghoff for fitting, but there were more barrels that were not fitted at Krieghoff. I don't know what the total 16 gauge barrel production was, but barrels were offered by Skeuse for fitting here.