Trojan 12 gauge barrel length

[10 bore]

my is serial number is 222234 but not in the book. I checked how long the chokes were, left was 4 1/2 with.026 and right 3 1/2 inches long with .008. Barrels are wright for factory 26 in. scott

[Dean Romig]

That serial number is about 1927 so is long after WW1 as Researcher said 26" barrels were introducer after WW1.






.

[10 bore]

Originally Posted by Dean Romig

That serial number is about 1927 so is long after WW1 as Researcher said 26" barrels were introducer after WW1.






.

Yes, Just a FYI. scott

[Brush Buster]

Remember also , although " The Book " is quite helpful , it is not written in stone !

[David Penland]

Originally Posted by Brian Dudley

26" would be a "special order" for a 12g trojan. As they were cataloged as being available in 28" and 30". Not standard, or common, but they are out there. And just like '32 fords, there are also more out there then were actually made.

So I picked up this Trojan 12 gauge. Barrels are 26". Serial # 201909 according to the book has 30" barrels. Please look at these pics and let me know what you think. A dime will fit in the right barrel and will not fit in the left.

[David Penland]

Top

[David Penland]

End

[David Penland]

Pic

[J. A. EARLY]

Originally Posted by David Penland

So I picked up this Trojan 12 gauge. Barrels are 26". Serial # 201909 according to the book has 30" barrels. Please look at these pics and let me know what you think. A dime will fit in the right barrel and will not fit in the left.

Dimes are useful if you have nothing else and in a pinch. Dimes are about .705 to .710, so if it goes you can have anything from .024 to .000 with a standard .729 bore. If it does not go with a standard bore you have anywhere from .025 on up choke. But cut from 30" to 26" the choke constriction will not be very long so don't expect it to throw the pattern of an uncut gun with the same constriction and full length chokes.

[B. Dudley]

Those barrels are uncut. Matting terminates. And a dime suggests they have choke.

Is there a "2" on the forend lug? Curious.