Made the leap!

[TallCrow]

I'm proud to say that I finally joined the fraternity with this DH 12 gauge.

I'll request a letter shortly but here is what I currently know.

SN 146932
1908
Grade 3 DH
Frame size 1
26" Damascus barrels
Capped pistol grip
Weighs in at 6.5 pounds
It had some restoration work done by a Robert Daugherty of Pittsburgh PA about 20 years ago but I'm not certain exactly what was done.
Bores are bright and shiny but may have a couple of spots on them.

Many thanks to those who offered input on my prior thread and via private messages. Special thanks to Dean Romig and Gary Carmichael!

[Jeff Christie]

My great grandfathers DHE is less than 300 numbers away. I use it all season long. Welcome to the world of Parkers. You'll love it.

[Kirk Potter]

Nice!

[John Taddeo]

The 0 stamp on the lug ???

[Dean Romig]

Robbie, please measure the exact distance between firing pin centers in sixteenths of an inch and tell us what you find.





.

[TallCrow]

Beyond the "0" the stamp was hard to read but looking at it from different angles I see a "1".

The firing pin measurement is 1-1/16" which confirms a 1 frame, correct?

As John asked, what does the "0" indicate?

Also, I created an album with more pictures...

[B. Dudley]

That measurement would be for a 1 frame.

The "0" on the lug is an odd one. It is smaller than a normal frame size stamping. Everything on the gun has been gone over, so it could be there for any reason I suppose.

[OH Osthaus]

i have a 3 frame PH 10 with only the 0 on the lug- it measures to a 3 frame

not the best picture - but you can see it

[Dean Romig]

The 0 must be an inspector's mark...maybe "J" stamped the 0.

It must represent some meaning we may never understand.





.

[Spin Drift]

Very, very nice Grade 3. Love the wood. Is it possible the barrels were blackened?