Looking for advice 1907 parker

[Joseph James]

Hello,
I have inherited this parker from a grandfather who has recently passed away. This SN is 144328. The stock was at some point cracked in half and then disassembled and never put back together. I would love to work on getting it back together but want to make sure whatever stock I buy is correct, and going to be appropriate for the firearm. I'm near Cleveland Ohio and so far have not been able to find anyone with much knowledge on the parker model shotguns. Any help is greatly appreciated!

[Randy Roberts]

Joseph you may not need to buy a new stock at all. There are some wood magicians among us that can work magic. I would suggest that you post some pictures of your gun and the membership can comment from there.

[winplumber]

You gun is a 0 grade with Plain Twist Barrels and should be 30" in length 12 gauge Condition of the bores is a key for your project What town are you in?

[Joseph James]

Originally Posted by Steve Huffman

You gun is a 0 grade with Plain Twist Barrels and should be 30" in length 12 gauge Condition of the bores is a key for your project What town are you in?

Thanks for the information! The overall condition is pretty good and looking through the bores it looks like a mirror finish end to end. I will be posting some pictures shortly.

[Joseph James]

Here are some pictures, hopefully they upload!

[Joseph James]

A few more pictures

[Big D]

I suspect there are several stockers who can put that back together for a LOT less money than a new stock

[Joseph James]

Originally Posted by John Dallas

I suspect there are several stockers who can put that back together for a LOT less money than a new stock

That would be great if that could be done. Any recommendations on somebody that's near Cleveland/Medina Ohio? Thank you!

[winplumber]

How is the trigger guard and the frame was it damaged. From what I see this repair/ restock will far exceed the value of the gun it, The comb has had a riser spliced on too. Good luck hope you are able to shoot the old gal someday.

[Joseph James]

Originally Posted by Steve Huffman

How is the trigger guard and the frame was it damaged. From what I see this repair/ restock will far exceed the value of the gun it, The comb has had a riser spliced on too. Good luck hope you are able to shoot the old gal someday.

Are these guns fairly common then? If not worth repairing, it may just end up getting sold as is. All the pieces and parts are with it and in good condition, just the stock was broken about 65 years ago and then stored after that.