|
04-15-2020, 04:53 PM | #3 | ||||||
|
what dean said....pete lester done a fine job posting all of these 10 ga loads..i have used several of these loads myself...good hunting...this virus got the U S LOCK DOWN TOO....charlie
|
||||||
04-15-2020, 06:48 PM | #4 | ||||||
|
Steve:
Check out Load #3: http://parkerguns.org/forums/showthr...&highlight=Wsf You can swap the bismuth for lead. (See Load #4.) I used Load #3 to kill these geese. They dropped dead. -Victor |
||||||
The Following 6 Users Say Thank You to Victor Wasylyna For Your Post: |
04-15-2020, 07:16 PM | #5 | ||||||
|
Love your Parker Victor, with the P stamped Laminated Steel barrels.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
The Following User Says Thank You to Dean Romig For Your Post: |
04-16-2020, 09:19 AM | #6 | ||||||
|
If the OP comes back - you didn't say what powder you're useing. You may have a problem with our loads if you can't get the same powder.
__________________
Paul Harm |
||||||
04-23-2020, 12:27 PM | #7 | ||||||
|
10ga Rem Hull cut to 2 7/8"
Win 209 27.0 gr Green Dot (1) .125 NC 40lbs wad pressure + (2) 1/2" Fiber + (1) OSC ( all 10ga) 1 1/4 oz #7.5 lead 6 fold Crimp 1204 fps, ev 11 - 7233 psi ev 400 |
||||||
The Following 3 Users Say Thank You to Mark Garrett For Your Post: |
05-20-2020, 03:36 PM | #8 | ||||||
|
Thankyou guys for the info. And take care.
__________________
From where the sun Don`t shine Steve |
||||||
05-21-2020, 06:53 AM | #9 | ||||||
|
Steve,
The lock down is a walk in the park. |
||||||
The Following 2 Users Say Thank You to Harry Collins For Your Post: |
|
|