![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | |||||||
|
![]() Quote:
https://www.gunsinternational.com/gu...n_id=101362198 I was just curious what the markings mean . Did early Parkers not have a frame size designation ? |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
When I first read your post my guess was going to be an early gun. I have some early 10s and 12s that do not have frame size marked on the barrel lug. So yes that was the case with early Lifters.
I looked at the gun, which is a nice early Grade 2 equivalent Parker. I would "guess" a production date 1873 or 1874. The chambers usually measure 2 5/8" on an early 10 gauge lifter like that though they may have be modified at some point. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | |||||||
|
![]() Quote:
|
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
Milton, I would agree that looks like a 10ga. on a 2 frame(which is a nice configuration). That would have been a nice one. I have noticed in some of the early guns the breach/chamber walls are much thinner on the smaller frame guns(even though there is not a number designation for frame size).
When I bought a relative early 12ga. Lifter(#3492) I thought the same thing on the thickness of the breach/chamber walls. Here is that thread which has some good pictures: http://parkerguns.org/forums/showthread.php?t=20301 The early guns(like all Parkers) are a lot of fun! |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Jay Oliver For Your Post: |
![]() |
![]() |
![]() |
#7 | |||||||
|
![]() Quote:
|
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
I think a "light" 10 is a nice addition to anyone's collection. I shoot a lot of black powder and lighter 10 gauge loads for sporting clays. You essentially have a 10 gauge on a 12 gauge frame. You have the advantage of a better pattern and not much recoil using those target loads. I have also done some hunting with black powder shells with a #2 frame 10 gauge and like that too.
I have a #2 frame 10 gauge lifter that I found some #2 frame 12 gauge barrels for and put together a nice two barrel combination. I should add in Parkers a #2 frame 10 is usually in the 8-9 pound range. My lifter is 8 1/2 lbs(with 30" barrels) and my top action is just under 9 pounds(32" barrels). |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Jay Oliver For Your Post: |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
The very earliest lifters often did not have the frame size on the lug.
However, the frame size can be determined by measuring the exact distance between firing pin centers. Frame sizes are discussed at length in The Parker Story. I wonder if the subject gun is chambered to take the 10B shell, given the serial number is preceded with a B. .
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Dean Romig For Your Post: |
![]() |
![]() |
![]() |
#10 | ||||||
|
![]()
1867 huh?
A lot of misinformation in that listing.
__________________
B. Dudley |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|