Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Announcement, Help & Introduction Forums Website & Forum - Help & Assistance

Notices

Reply
Thread Tools Display Modes
Help with Stange Finding on Parker
Unread 09-26-2019, 05:46 PM   #1
Member
esetter - Gerry Addison
PGCA Member

Member Info
 
Join Date: Jun 2011
Posts: 785
Thanks: 54
Thanked 1,059 Times in 279 Posts

Default Help with Stange Finding on Parker

I just got in a nice G grade 16 gauge Parker and it has a couple things I'm not sure of. First there is an obvious plugged hole in the breech end of the barrels on the rib (see photos). I've included two photos so you can see it up close and see that the matting was definitely cut after the plug was put into the rib. There is only one plug on the rib.

Second, there is P.S. stamped on the barrel flats. Does anyone know what this stands for?

Third, when measuring the barrels I find both barrels measure .666 for the bores with .020 and .033 constrictions. Minimum barrel wall thickness on one barrel is .021 and the other .025. These are only in one area of the barrel with most of the barrel being well above .025. The thin areas are about 6 inches from the muzzle so I know there is no danger from pressure. Would these figures be unusual from a gun in serial number 193XXX range.





Thanks in advance for your help!
Gerry Addison is offline   Reply With Quote
The Following 2 Users Say Thank You to Gerry Addison For Your Post:
Unread 09-26-2019, 06:04 PM   #2
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 31,561
Thanks: 35,441
Thanked 33,040 Times in 12,321 Posts

Default

Triple post Gerry.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is online now   Reply With Quote
Unread 09-26-2019, 08:19 PM   #3
Member
Bill Murphy
PGCA Lifetime
Member Since
Second Grade

Member Info
 
Join Date: Jun 2009
Posts: 15,524
Thanks: 6,119
Thanked 8,785 Times in 4,718 Posts

Default

The plug holds the extension rib in place. P.S. is the steel marking, Parker Special. The wall thicknesses six inches from the muzzle are no problem and probably not unusual in a light 16 gauge.
Bill Murphy is offline   Reply With Quote
The Following 2 Users Say Thank You to Bill Murphy For Your Post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:43 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.