Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
I am looking for suggestions on how to permanently decrease the drop at heel, and make a beautiful old DH more shootable. The stock dimensions are approx. 1 3/4" X 3 1/4" X 15". I would like to get it to about 1 1/2" X 2 1/2 X 15". It is apparently not a candidate for stock bending due to an old hairline crack at the wrist which has been professionally repaired.
I would rather not re-stock the gun or use slip-on or glue-on pads. Has anyone ever had good results in decreasing drop by re-inletting a stock?
Decreasing the drop at heel of a Parker stock
Threaded Mode