|
02-22-2012, 09:24 AM | #3 | ||||||
|
Dave is a heck of a repair guy. I wish I still had the "before and after" pictures of a Redmond hammer gun that was broken into many pieces around the locks and tangs. It was invisibly repaired and now, many years later, is still being shopped around among local shooters with no hint that it was ever repaired.
|
||||||
02-24-2012, 06:12 PM | #4 | ||||||
|
Dave did a repair on an auto 5 for me, it was split at the end of the tang and the head of the stock was spread open about 1/4" He was able to fix it leaving the original finish on the stock, you would have a hard time finding it if you didn't know where it was. Very nice guy to talk to.
|
||||||
03-03-2012, 02:42 PM | #5 | ||||||
|
Here is the finished repair by Dave Wolf in Waco Texas. This was a spot repair as I didn't want to have the entire stock refinished. Dave said he could make the repair completely disappear if the stock were refinished. This shots are taken from a couple of inches away so when handling the gun you really don't see the repair at all. The stock was broken completely in half.
|
||||||
The Following User Says Thank You to Gerry Addison For Your Post: |
|
|