Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions Shotgun Shell Reloading

Notices

Reply
Thread Tools Display Modes
Fiocchi Primers
Unread 02-17-2012, 08:27 PM   #1
Member
Kensal Rise
PGCA Member

Member Info
 
Join Date: Sep 2011
Posts: 1,769
Thanks: 584
Thanked 2,577 Times in 926 Posts

Default Fiocchi Primers

Friends:
Now that we've flogged Cheddite primers, I thought I might provide some insight into Fiocchi 209s.

A local sports store is currently trying to dump a supply of these at under $20 a brick, so I thought I'd try some.

Before loading, I put a dial caliper on them and found their diameter just under the rim to be identical to Winchester 209s. However, they taper less toward the flash hole than Win. But only by a .001 or so.

So... I tried the Fiocchis in 28 and 12 bore guns. Both hammer and hammerless. They work fine -- and seem to leave less residue in the bore. Also... angular impact sensitivity seems fine. This can be an issue in older hammer guns and some O/Us with angled firing pins.

Also... reloading a case fired with a Fiocchi with another Win. primer does not seem to be a problem. The Win. primers fit as well as ever.

Bottom line: I get great results with Fiocchi 209 primers and save enough on each brick to buy a Happy Meal. Seems appropriate.

Best Kensal
John Campbell is offline   Reply With Quote
Unread 02-18-2012, 01:11 PM   #2
Member
10 bore
PGCA Member
 
scott kittredge's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 1,906
Thanks: 7,320
Thanked 2,504 Times in 813 Posts

Default

yup, thats all i reload with i buy them by the 5000 brick and yet to have one not work
scott kittredge is offline   Reply With Quote
Unread 02-18-2012, 04:20 PM   #3
Member
charlie cleveland
PGCA Member

Member Info
 
Join Date: Jul 2009
Posts: 12,986
Thanks: 0
Thanked 7,796 Times in 3,967 Posts

Default

siunce were on primers have any you fellas used rio primers they seem to be bigger in size than other 209 s i only use them in some of my hulls that the winchester 209 s push in too easily or want stay in at all...the reo works fine at this for me.... charlie
charlie cleveland is offline   Reply With Quote
Unread 02-18-2012, 05:08 PM   #4
Member
J.B. Books
PGCA Member
 
Pete Lester's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 2,877
Thanks: 1,657
Thanked 4,830 Times in 1,378 Posts

Default

My experience has been the Fio 616 (209 type) primers are larger than Win/Rem/Federal and that switching back to Win/Rem/Federal after using Fio's resulted in a bunch of loose primers and powder in the bottom of my shell bag. I have read the are straight sided and the amercan primers are step sided so after using a Fio the US primer would not be holding on by much. Other than that they seem to work fine. If you Google Fiocchi primers and cold weather you will see some reports on duck hunting chat.com, trapshooters.com that people report issues with cold weather use.

http://www.duckhuntingchat.com/forum...?f=14&t=125799

http://www.trapshooters.com/cfpages/...05&Messages=16
Pete Lester is offline   Reply With Quote
Unread 02-18-2012, 07:25 PM   #5
Member
Kensal Rise
PGCA Member

Member Info
 
Join Date: Sep 2011
Posts: 1,769
Thanks: 584
Thanked 2,577 Times in 926 Posts

Default

JB:
Darn if I can see a step in a Win. 209... but maybe I don't have enough magnification. But both the Win 209 and Fiocchi come to a "stop" in a AA primer pocket at the same point.

Cold weather? Maybe there are problems there... but I use 99% of my cartridges in summer on the clays range. I guess if I were making duck ammo, I'd pop for real Winchester primers to be safe.

Glad to hear of your insights.

Best, Kensal
John Campbell is offline   Reply With Quote
Unread 02-18-2012, 07:39 PM   #6
Member
J.B. Books
PGCA Member
 
Pete Lester's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 2,877
Thanks: 1,657
Thanked 4,830 Times in 1,378 Posts

Default

My experience with primer fallout was shooting Federal 12ga Gold Medal hulls reloaded with Fio 616 primers and then loaded again with Federal 209A's. The result was many shells missing primers. These shells were loose inside a fanny pack for crow hunting and they get bounced around when walking. Howeve I had never experienced primer fallout before. Boxed and used on a trap or skeet range you may not notice.
Pete Lester is offline   Reply With Quote
Unread 02-18-2012, 08:06 PM   #7
Member
charlie cleveland
PGCA Member

Member Info
 
Join Date: Jul 2009
Posts: 12,986
Thanks: 0
Thanked 7,796 Times in 3,967 Posts

Default

yep ive experiance them same thing primer and powder in the bottom of the sack... i too am a big fan of the winchester 209 but i do install a rio primer if the pocket is to big...ive shot a few of the rio brand shells and i must say they will roll a can on the ground 10 yards fruther than most shells...seem to be loaded pretty stout... charlie
charlie cleveland is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:23 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.