Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums General Parker Discussions

Notices

Reply
Thread Tools Display Modes
2 barrel VH 12 gauge
Unread 05-02-2021, 05:59 PM   #1
Member
bob lyons
PGCA Member

Member Info
 
Join Date: Nov 2018
Posts: 306
Thanks: 477
Thanked 381 Times in 110 Posts

Default 2 barrel VH 12 gauge

I would like your opinion.
I have the opportunity to pick up a VH 2 barrel 12 gauge 26 and 28 inch barrels.
The stock is in very poor condition, pinned, cracked and rechecked.
My opinion would be to get a new stock made.
The asking price is 1500.
After checking with a if people the price of a new stock could range fro a high of 5000 to a low of 3000.
My concern is would I have way more money in this gun than it would be ever worth.
Thoughts?
bob lyons is offline   Reply With Quote
Unread 05-02-2021, 06:14 PM   #2
Member
Bob Jurewicz
PGCA Member
 
Bob Jurewicz's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 1,466
Thanks: 1,557
Thanked 1,984 Times in 565 Posts

Default

YES!
Bob Jurewicz
Bob Jurewicz is offline   Reply With Quote
The Following User Says Thank You to Bob Jurewicz For Your Post:
Unread 05-02-2021, 07:27 PM   #3
Member
Randy Roberts
PGCA Lifetime
Member
 
Randy G Roberts's Avatar

Member Info
 
Join Date: Apr 2017
Posts: 2,906
Thanks: 4,458
Thanked 5,659 Times in 1,854 Posts

Default

Bob that one's a financial loser for sure. I know, I co-authored the book on that topic. If there's no sentimental family history or something you didn't mention I would pass for sure.
Randy G Roberts is offline   Reply With Quote
Unread 05-02-2021, 07:47 PM   #4
Member
bob lyons
PGCA Member

Member Info
 
Join Date: Nov 2018
Posts: 306
Thanks: 477
Thanked 381 Times in 110 Posts

Default

Thanks no family history just a plain vh 12 gauge
bob lyons is offline   Reply With Quote
Unread 05-02-2021, 08:14 PM   #5
Member
BRDHNTR
PGCA Lifetime
Member

Member Info
 
Join Date: Nov 2012
Posts: 3,770
Thanks: 7,259
Thanked 2,730 Times in 1,250 Posts

Default

Keep looking. There are better ones out there for good money. The one you inquired about is a money sink.
allen newell is offline   Reply With Quote
Unread 05-02-2021, 08:27 PM   #6
Member
Mike Poindexter
PGCA Member

Member Info
 
Join Date: Jun 2009
Posts: 518
Thanks: 570
Thanked 632 Times in 246 Posts

Default

If the barrels are in the same condition as the stock, I'd say pass. If the barrels are nice, and both factory numbered to the gun, there are other ways to restock the gun besides a custom job from an accomplished stockmaker. I put a new buttstock on an Ithaca Lewis model a number of years ago. Got ShowMe gunstocks to fit a semi inletted blank to the action for $300, I think the blank was $250, then I finished the final sand and finish with French Polish myself. I paid 325 for the gun (also a 2 barrel set by the way) and came out with a nice two barrel shooter, with a stock cut to my dimensions, for less than a grand. You might see if you can get him down to a grand and then make some inquiries into semi inletted stocks. FWIW.
Mike Poindexter is offline   Reply With Quote
The Following User Says Thank You to Mike Poindexter For Your Post:
Unread 05-02-2021, 08:30 PM   #7
Member
6pt-Sika
PGCA Lifetime
Member
 
CraigThompson's Avatar

Member Info
 
Join Date: Mar 2011
Posts: 8,531
Thanks: 5,550
Thanked 7,527 Times in 3,401 Posts

Default

I bought a VH 12 2 barrel 28 and 32 set that was originally ordered locally . I paid way below what you’re guy is asking . My gun has been pinned but should turn out okay if I ever get around to shooting it , hence the number one problem with acquiring an over abundance of shotguns . You can’t shoot them all enough to pick out the ones that work best for you . This two barrel set however may eventually end up in the Philippines with me . It has no sentimental attachment and what I have invested isn’t that great if it should disappear . And the short barrels are more open and of course the longer barrels are tighter . I’d never consider taking a Parker there that was of several thousand value .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines !
CraigThompson is offline   Reply With Quote
Unread 05-02-2021, 08:50 PM   #8
Member
Mike Poindexter
PGCA Member

Member Info
 
Join Date: Jun 2009
Posts: 518
Thanks: 570
Thanked 632 Times in 246 Posts

Default

P.S. that price was without any checkering. A year or so later I sent the gun to California to a shop that did fairly cheap machine checkering.
They put on a two panel two point diamond pattern based on a rubbing I sent them from the original Ithaca stock. $165 plus $40 shipping. I couldnt be happier for a field gun.
Mike Poindexter is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:25 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.