8 ga. Industrial Shells

[Craig Budgeon]

I received 2 8 ga. industrial shells today. I did not examine them while the friend that dropped them off was present. After looking at the head stamp I was suspicious, it read Remington Industrial 8 GA. At that point I emailed my friend and asked where he got them and there use. He did not disclose the source, however, he told me they were used to open a chiller industrial furnace and he believed they were slugs. If I owned a Parker 8 Ga. I would not be putting them through my gun. No I am not going to pass these along but, rather return to the previous owner.

[Milton C Starr]

Originally Posted by Craig Budgeon

I received 2 8 ga. industrial shells today. I did not examine them while the friend that dropped them off was present. After looking at the head stamp I was suspicious, it read Remington Industrial 8 GA. At that point I emailed my friend and asked where he got them and there use. He did not disclose the source, however, he told me they were used to open a chiller industrial furnace and he believed they were slugs. If I owned a Parker 8 Ga. I would not be putting them through my gun. No I am not going to pass these along but, rather return to the previous owner.

Yeah those are pretty readily available online , the hulls can be used after some resizing . They have been using 8 gauge industrial guns in kilns for decades . I have seen Winchester paper rolled crimp 8 gauge industrial shells .

I wonder if any of the 8 gauge guys thought of trying to do a group buy from one of makers of the industrial hulls for some standard hulls . A group of us done that for custom rifle brass a few years back we had to place a order of 10,000 cases @ $3 per case .

[MarketHunter]

The industrial hulls used to be available for reloading from a couple different places. You just have to resize the brass, they won't load in an actual shotgun otherwise.

[edgarspencer]

I resized about 100 NPE, and sent my sizing equipment on to another member. They are about all that's available today, and they are very high quality. The current version are black. They used to be Green, and the Winchesters are clear.

[charlie cleveland]

I have some of these shells in paper hull and plastic hull....they varied in different colors thru the years....I have grren ones yellow and black in the Remington brand...the Winchesters are clear im sure the early Winchesters were paper too...the 4 gauge was also made in industrial shells and I ve seen them in 10 ga and 12 ga...the 12 ga is fired from a regular shoulder fired gun...I read an articule on the 12 ga...this fellows job was to break up the clinkers in a furnace...he used up to 3 pallets of ammo in a given night..he said no kind of shotgun made except a Mossberg pump gun would make it thru 3 pallets of ammo with out tearing up except the Mossberg s...lots of shells in a pallet of ammo...charlie

[Milton C Starr]

Originally Posted by charlie cleveland

I have some of these shells in paper hull and plastic hull....they varied in different colors thru the years....I have grren ones yellow and black in the Remington brand...the Winchesters are clear im sure the early Winchesters were paper too...the 4 gauge was also made in industrial shells and I ve seen them in 10 ga and 12 ga...the 12 ga is fired from a regular shoulder fired gun...I read an articule on the 12 ga...this fellows job was to break up the clinkers in a furnace...he used up to 3 pallets of ammo in a given night..he said no kind of shotgun made except a Mossberg pump gun would make it thru 3 pallets of ammo with out tearing up except the Mossberg s...lots of shells in a pallet of ammo...charlie

Charlie that sounds pretty rough on the shoulder haha , I have seen some guys build custom shoulder fired 8 gauge industrial guns . There used to be a guy on GB who sold bolt action ones . Would make a interesting slug gun I suppose .

[Den]

https://youtu.be/5CRIC3Yona4

[edgarspencer]

Originally Posted by Craig Budgeon

If I owned a Parker 8 Ga. I would not be putting them through my gun. No I am not going to pass these along but, rather return to the previous owner.

Craig, I'm not sure what concerned you about the industrial hulls, but if you were to cross-section one (Yes, I have) you would find they are as stoutly made as possible, and certainly more so than hull like the cheap Winchesters sold at Walmart, etc. The double belt of the rim is added to the first one, so you have twice the base thickness. If you owned an 8 ga. you would be using these, or none at all.

[edgarspencer]

It's a little ragged around the primer pocket, but that's because I was using a hacksaw. The base seems pretty darn stout in my opinion.

[Eric Estes]

He may have assumed they would chamber in a shotgun as is, leading to his concern. Of course their value, unless you own industrial equipment that uses them, is in resizing the empty hulls and loading for 8ga shotgun.