Parker lifter firing pins/bushings and stock
I picked up a parker lifter from an antique gun dealer for a pretty good piece it was missing the firing pins and bushings and needs a stock but the action is tight barrels are sound. And the forend is present and complete but I need to acquire or make a stock and firing pins and bushings.
I would like to either make the stock or get a modest 95% inleted stock which I am not to worried about but the firing pins and bushings are proving to be quite difficult to find any info on I have seen a few pictures of them in the take down guide on this site but I have not been able to find any info on them particularly the thread size and pitch best I can tell they are 3/8 something finer than 24 any advice on acquiring a stock blank or firing pins and bushings would be much appreciated I have a lathe so making the bushings wouldn't be to big a deal if I knew the size and and pitch I just don't want to guess and bubba up the gun if it can be avoided
|
Threaded Mode