|
04-03-2018, 08:19 AM | #3 | ||||||
|
Thanks Tom, That sound like a good recipe. I just got set up for reloading and have looking the various powder websites and post on this forum. When I got set up I order lots of components from Ballistic Products. I actually don't have the Gualdini wad I mentioned above but do have:
Competition Special - 072CS12 PT1205 EML-12 In my research it seams like that cheaper grey Claybuster CB1078 wads are not the best with straight walled hulls like the Cheddite. I will keep reading and researching. |
||||||
04-03-2018, 08:23 AM | #4 | ||||||
|
You're gonna loose a little pressure because RST hulls are straight walled and the wads you're using are for tapered wall shells. The 3/4oz load calls for 15.5 to 17.3 in the Fed hull - also straight walled. It's been claimed in SC's magazines that 3/4oz loads have a hot core with tighter patterns unless velocity is up around 1300fps. So your light loads might just have been a smaller pattern. If it were me loading 7/8oz with the 0178 wad and RD I'd be loading around 18grs- JMHO.
__________________
Paul Harm |
||||||
The Following User Says Thank You to Paul Harm For Your Post: |
|
|