Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums General Parker Discussions

Notices

Reply
Thread Tools Display Modes
Unread 12-02-2018, 11:31 PM   #11
Member
Jack Hamner
Forum Associate

Member Info
 
Join Date: Feb 2013
Posts: 77
Thanks: 1
Thanked 14 Times in 6 Posts

Default

Quote:
Originally Posted by Robin Lewis View Post
My guess is that you need to measure the bore diameter (not chamber or choke area) to know for sure. According to http://www.hallowellco.com/bore_size_chart.htm you will measure .729 if its a 12 ga and .693 if its a 14 ga.

I found an interesting discussion on the A/B topic at https://forum.cartridgecollectors.org/t/16b-guage/9315 which my clear up or maybe confuse the issue.....?

Interesting topic none the less. That thread concludes with the following text:
All depends what you call the gauge.

If you are referring to it at the theoretical diameter of the bore (I am talking here about the British standard because US guns were following it in these old time)
we have for example
12 gauge = 18.52 (=0.729 inches)
14 gauge = 17.60 (0.693 inches)
16 gauge = 16.81 (0.662 inches)
20 gauge = 15.62 (0.615 inches)
From the chart I posted you can see the 12B and the 16B have these theoretical values.

About the A ctges, because there is a conical recess they also have the same bore diameter.
Therefore the assertion : 16 B and 20 A guns have a different bore diameter is false.

If you are referring to the standards the Brits used :
12 gauge can vary from 18.80 (0.740) to 18.03 (0.710) (this last one being in fact theoretical 13 Ga)
14 gauge can vary from 17.81 (0.701) to 17.20 (0.677) (this last one being in fact theoretical 15 Gauge)
16 gauge can vary from 16.99 (0.669) to 16.18 (0.637) (this last one being in fact 18 Gauge)
20 gauge can vary from 15.90 (0.626) to 15.14 (0.596) (this last one being in fact theoretical 22 gauge)
To which value is he referring in this case ??

If always at the same period you are referring to the US way of manufacturing I have no info about the spread.
Perhaps (and I think) the spread was narrower.
To which value is he referring ??

If he is referring to the nowadays US standard, we get :
12 gauge can vary from 18.92 (0.745) to 18.41 (0.725)
16 gauge can vary from 17.40 (0.685) to 16.89 (0.665)
20 gauge can vary from 16.13 (0.635) to 15.62 (0.615)

Conclusion :
Saying that this corresponds or not to a 20 gauge is pretty inaccurate.
You have always to tell the period of time, the standard and the exact value of what you call a 20 gauge bore.

Shortly, I would say that, taking into consideration the historical context:
a 12 B and a 14 A guns have the same bore diameter
a 14 B and a 16 a guns have the same bore diameter
a 16 B and 20 A guns have the same bore diameter
Thanks, Robin, but this ol' country boy is REALLY confused now!
Jack Hamner is offline   Reply With Quote
Unread 12-02-2018, 11:35 PM   #12
Member
Jack Hamner
Forum Associate

Member Info
 
Join Date: Feb 2013
Posts: 77
Thanks: 1
Thanked 14 Times in 6 Posts

Default

Quote:
Originally Posted by Brian Dudley View Post
A lot of early guns are oversized in the bores. So bore measurements alone will not give a true answer. If records are available, a letter is a good way to confirm original configuration.
Thanks so much, Brian.
Jack Hamner is offline   Reply With Quote
Unread 12-02-2018, 11:46 PM   #13
Member
Jack Hamner
Forum Associate

Member Info
 
Join Date: Feb 2013
Posts: 77
Thanks: 1
Thanked 14 Times in 6 Posts

Default

Hypothetical question--given the low serial number and old military surplus steel barrels, is the gun more likely to be a 14 ga. or a 12b or can that question not be answered? I think only about 150 14 gauges were made. I assume a 14 ga. would be more valuable than 12b?
Jack Hamner is offline   Reply With Quote
Unread 12-02-2018, 11:58 PM   #14
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 31,557
Thanks: 35,430
Thanked 33,039 Times in 12,321 Posts

Default

Given the rarity of 14 bore Parkers, It’s more likely to be a 12B.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
Unread 12-03-2018, 11:29 AM   #15
Member
Pa SxS
Research Chairman
PGCA Lifetime
Member
 
Chuck Bishop's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 2,859
Thanks: 1,196
Thanked 4,925 Times in 1,410 Posts

Default

Without seeing the gun but knowing it's S/N, I'd guess it's the lowest grade back action lifter gun with a straight grip. Some of the old back action guns were chambered for the 12b brass cartridge which has the same dimensions as a 14ga. paper shell. I'll also venture a guess that the bore diameter is equivalent to an 11ga. gun. I have actually seen 12b/14 entered in the first stock book. I have one S/N 63 and I know of at least one other that a member has.
Chuck Bishop is offline   Reply With Quote
The Following User Says Thank You to Chuck Bishop For Your Post:
Unread 12-03-2018, 11:35 AM   #16
Member
Mills
PGCA Lifetime Member
Since 3rd Grade
 
Mills Morrison's Avatar

Member Info
 
Join Date: Nov 2011
Posts: 10,301
Thanks: 14,182
Thanked 12,306 Times in 4,411 Posts

Default

Is Richard Hoover still with us? He was the expert on these early odd gauges
Mills Morrison is offline   Reply With Quote
Unread 12-03-2018, 11:45 AM   #17
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 31,557
Thanks: 35,430
Thanked 33,039 Times in 12,321 Posts

Default

Richard Hoover, Charlie Price and Austin Hogan did a lot of research on the various bore and chamber sizes of the very early Parkers.

I have files containing all the known (at the time they were all with us and active) 11-gauge serial numbers and there are no three digit serial numbers in those files.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
Unread 12-03-2018, 05:46 PM   #18
Member
Jack Hamner
Forum Associate

Member Info
 
Join Date: Feb 2013
Posts: 77
Thanks: 1
Thanked 14 Times in 6 Posts

Default

Quote:
Originally Posted by Dean Romig View Post
Given the rarity of 14 bore Parkers, It’s more likely to be a 12B.





.
Thanks, Dean...........I was hoping for a 14, but I expect you're right on this one.
Jack Hamner is offline   Reply With Quote
Unread 12-03-2018, 05:52 PM   #19
Member
Jack Hamner
Forum Associate

Member Info
 
Join Date: Feb 2013
Posts: 77
Thanks: 1
Thanked 14 Times in 6 Posts

Default

Quote:
Originally Posted by Chuck Bishop View Post
Without seeing the gun but knowing it's S/N, I'd guess it's the lowest grade back action lifter gun with a straight grip. Some of the old back action guns were chambered for the 12b brass cartridge which has the same dimensions as a 14ga. paper shell. I'll also venture a guess that the bore diameter is equivalent to an 11ga. gun. I have actually seen 12b/14 entered in the first stock book. I have one S/N 63 and I know of at least one other that a member has.
Thank you, Chuck. I'm still somewhat confused as to what I have. How could I tell for sure other than having someone measure the bore diameter? Someone did this for me about a year ago and came up with the 12b. Don't know if I should get a second opinion or not! Thanks! Jack.

P.S. I just found an all brass unfired REM-UMC Best 12 gauge shell that will not go into either chamber of the gun. Not sure what that means, if anything, though.

Last edited by Jack Hamner; 12-03-2018 at 06:14 PM..
Jack Hamner is offline   Reply With Quote
Unread 12-03-2018, 06:29 PM   #20
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 31,557
Thanks: 35,430
Thanked 33,039 Times in 12,321 Posts

Default

If that one is a 12A you need to try a 12 B and if a 12B won’t go in either chamber at all, then in all likelihood it’s a 14 gauge.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
Reply

Tags
14 gauge, measuring

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:57 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.