VH Front Sight
Hello out there in Parker land. I have a VH with 30" full choke barrels that needs a front sight replacement. The pictures on the net that show the front of VH barrels mostly show them with silver or white metal front sight beads. They appear to be the ball part of the bead with a undercut and then a taper down to the rib, where a flat sits on the rib. Does anyone know where I can get a replacement that looks like the original. If not could some kind VH owner take a pair of dial calipers and measure the diameter of the sight bead on theirs and also the small diameter of the sight at the top of the taper , right under the bead ball and also the height from the top of the sight down to the rib. With this info I can make one on a lathe. Thank you, Mike
|
Linear Mode
