Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions General Discussions about Other Fine Doubles

Notices

Reply
Thread Tools Display Modes
So a got a Purdey case need some ideas.
Unread 09-02-2019, 11:55 AM   #1
Member
Matto
PGCA Member

Member Info
 
Join Date: Oct 2015
Posts: 244
Thanks: 525
Thanked 324 Times in 111 Posts

Default So a got a Purdey case need some ideas.

First of all, I am hoping that this is a place where I can start this post? It seemed ok?

Ok, so so I purchased this Purdey trunk case. It came configured as a two stocks, three barrel case. I have it all taken apart and am currently securing the leather straps and corners where needed. Also adding extra canvas to support the hinge point and any corners that need a little extra support.

My question is how should I build up this case? I'm planning on selling it so I would like to know what is the best way to reconfigure the case or how would you like to see the case reconfigured?

I can make this case really anyway I want to, but I just need some inspiration from some other people.

I have the darker red Baize on order from England, so the insides will be the darker maroon or red color (original color). New black leather label will also be installed. After that it is what ever we all decide on.

Any and all advise is much welcomed.

Thanks Matt
Attached Images
File Type: jpg IMG_1045.jpg (508.7 KB, 6 views)
File Type: jpg IMG_1044.jpg (486.6 KB, 7 views)
File Type: jpg IMG_1043.jpg (500.2 KB, 4 views)
File Type: jpg IMG_1041.jpg (503.2 KB, 6 views)
__________________
If you are going to enter the race, you might as well try and win it.
Matthew Hanson is offline   Reply With Quote
The Following User Says Thank You to Matthew Hanson For Your Post:
Unread 09-02-2019, 01:14 PM   #2
Member
Kensal Rise
PGCA Member

Member Info
 
Join Date: Sep 2011
Posts: 1,768
Thanks: 580
Thanked 2,575 Times in 925 Posts

Default

Mr. Hanson:
This is what's known as a "motor case." Not a trunk case. I assume that it had a Purdey label inside when you acquired it? If not, there is no way to ascertain that it was built for a Purdey gun.

Generally from your information, these were made up for a pair or trio of guns. Few shooters have those on hand these days. If it were to be reconfigured, it might well be for a single or a pair. This all depends on the dimensions of the case.

But the final choice is your's.
John Campbell is offline   Reply With Quote
The Following User Says Thank You to John Campbell For Your Post:
Unread 09-02-2019, 02:02 PM   #3
Member
Matto
PGCA Member

Member Info
 
Join Date: Oct 2015
Posts: 244
Thanks: 525
Thanked 324 Times in 111 Posts

Default

Hey Ken,
It is in fact a Purdey case because it is stamped on the inside of the lip of the case and when I pulled off the old Baize, in pencil it is written on the wood on the bottom. It is hard to see in the pictures. You can make out the (PUR) before the shadows cover up the rest of the name. Has the name clearly written as well as the original configuration of the case itself It held two 30"barrels and one 28" barrel. it also has other numbers on the case suggesting the the original serial number of the two gun set?? Your guess is as good as mine. 22899 and 164484??
__________________
If you are going to enter the race, you might as well try and win it.
Matthew Hanson is offline   Reply With Quote
The Following User Says Thank You to Matthew Hanson For Your Post:
Unread 09-02-2019, 02:41 PM   #4
Member
Setter Man
PGCA Member

Member Info
 
Join Date: Nov 2008
Posts: 1,791
Thanks: 1,705
Thanked 1,636 Times in 634 Posts

Default

If you are interested in having it restored, Kevin McCormick, a member of the PGCA, does an outstanding job restoring old cases like this one.
Jay Gardner is offline   Reply With Quote
The Following User Says Thank You to Jay Gardner For Your Post:
Unread 09-02-2019, 07:00 PM   #5
Member
C.O.B.
Forum Associate
 
Rich Anderson's Avatar

Member Info
 
Join Date: May 2009
Posts: 6,072
Thanks: 2,217
Thanked 6,320 Times in 2,082 Posts

Default

Matt I'd do it as a single stock two barrel set. I just happen to know someone with a Purdey 16ga two barrel set
__________________
There is no hunting like the hunting of man, and those who have hunted armed men long enough and liked it, never care for anything else thereafter...Earnest Hemingway
Rich Anderson is offline   Reply With Quote
The Following 2 Users Say Thank You to Rich Anderson For Your Post:
Unread 09-02-2019, 07:50 PM   #6
Member
Matto
PGCA Member

Member Info
 
Join Date: Oct 2015
Posts: 244
Thanks: 525
Thanked 324 Times in 111 Posts

Default

Quote:
Originally Posted by Rich Anderson View Post
Matt I'd do it as a single stock two barrel set. I just happen to know someone with a Purdey 16ga two barrel set
hmmm... even more of a reason to go to Michigan!!
__________________
If you are going to enter the race, you might as well try and win it.
Matthew Hanson is offline   Reply With Quote
Unread 09-02-2019, 09:06 PM   #7
Member
Bill Murphy
PGCA Lifetime
Member Since
Second Grade

Member Info
 
Join Date: Jun 2009
Posts: 15,524
Thanks: 6,118
Thanked 8,783 Times in 4,718 Posts

Default

22,899 is a legitimate Purdey serial number. 164,484 is not. You didn't really rip out the bottom half of this wonderful case, did you?
Bill Murphy is online now   Reply With Quote
The Following User Says Thank You to Bill Murphy For Your Post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:59 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.