|
11-03-2011, 10:45 AM | #3 | ||||||
|
I looked into this on a gun that had the chokes bored way out. Shipping wust be done though his agent in CO. The total price was about $3000. Way too much for me.
I settled on having the chokes sleeved using the same/simialr process. Cost $450. Shipping still a hassle as they had to be sent to Canada. It is a good barrle fix if money is no issue. I have seem them. They looked great although I don't like the stampings placed in the barrels. Ray |
||||||
11-03-2011, 12:07 PM | #4 | ||||||
|
I think the price now through the CO agent is $4250
|
||||||
11-03-2011, 01:09 PM | #5 | ||||||
|
They need to get someone here in the U.S.A set up to do this, it would simplify things and probably make it more cost effective. The shipping process and proof house overhead could be avoided.
|
||||||
11-03-2011, 04:52 PM | #6 | ||||||
|
Good point. The cost would be reduced by a third just by eliminating the exchange rate. By also removing the shipping and proof charges the cost would be less than half of what is currently charged. If only I could afford a CNC honing machine....
|
||||||
11-04-2011, 05:02 PM | #7 | ||||||
|
I believe you can avoid all the proof house stampings by asking for a certificate of proof rather than the markings. Maybe they don't do this anymore but they used to I'm certain.
DLH
__________________
I was as virtuously given as a gentleman need to be; virtuous enough; swore little; diced not above seven times a week; went to a bawdy-house once in a quarter--of an hour; paid money that I borrowed, three of four times; lived well and in good compass: and now I live out of all order, out of all compass. Falstaff - Henry IV |
||||||
|
|